What year ranger axles?

[screamen_seamen]

I have read that ford ranger axles will work on my 89 coupe
With an 8.8 to convert the rear to 5 lug and
That you use 2 left side axles from a ranger, but can't figure out what year??? Also will the ranger drums work?

[Trick Pony]

Should have spent your time typing that stuff into google.
’83 to ’92 4 cylinder or 3.0L V6 Ranger/Bronco II with a 7.5″ rear end you will need two driver’s side axles.

[FoxBodyNick]

83 through 92. 7.5" rear with 3.0 cylinder.

[FoxBodyNick]

Should have spent your time typing that stuff into google.
’83 to ’92 4 cylinder or 3.0L V6 Ranger/Bronco II with a 7.5″ rear end you will need two driver’s side axles.

agreed. google is a wonderful tool... try to help yourself first =)

[VaderTT]

Or 2 passenger side aerostar, same years and they don't have to have the 3.0. My old ones came out of an 87 with the 2.3. Just look at the diff tag/engraving.

[Baron Von Crowder]

I have read that ford ranger axles will work on my 89 coupe
With an 8.8 to convert the rear to 5 lug and
That you use 2 left side axles from a ranger, but can't figure out what year??? Also will the ranger drums work?

Where are you located? I've got a pair I will let go.

And yes, ranger drums will work, so long as you get the 9" and not 10"

[Up0n0ne]

This is the garage section, God forbid it be used for what it was made for.

[FoxBodyNick]

god forbid people help themselves. people c
ontinue to ask the same questions instead of trying to find it on their own. call me a dick or an idealist or maybe just a dreamer

Nick

[screamen_seamen]

Yeah a dick is what I call you, thank you for the help guys I probably spent 3 hours reading post on here, but never found the year models. I apologize that I wasted your precious time. Next time just please don't give me the info I ask for if your going to be a dick about it. Thanks.

[Baron Von Crowder]

Yeah a dick is what I call you, thank you for the help guys I probably spent 3 hours reading post on here, but never found the year models. I apologize that I wasted your precious time. Next time just please don't give me the info I ask for if your going to be a dick about it. Thanks.

Fuck it newb, posts tits and move on.

[screamen_seamen]

New to this site, but been on many others for years. New to mustangs and looking for information not douch bags. I know how to use the search on this site and google. Just don't understand what in the crap is wrong with asking a simple question to what many people on this site would probably not have a problem with answering.

[FoxBodyNick]

I answered your question. I also stated try to research prior to. Good luck with your swap

Nick the Dick

[Baron Von Crowder]

New to this site, but been on many others for years. New to mustangs and looking for information not douch bags. I know how to use the search on this site and google. Just don't understand what in the crap is wrong with asking a simple question to what many people on this site would probably not have a problem with answering.

Some of it is that there are multiple sites out there with that info, part of it is newb hazing.

[screamen_seamen]

Well again I apologize for the inconvenience. I search this site for a couple hours before asking.

[1fast4]

Well again I apologize for the inconvenience. I search this site for a couple hours before asking.

Take it with a grain of salt an pull your panties out of your vag. The longer you are on here the more you will understand. Lots of good folks and a TON of good insight and info. Just be prepared for some shit now and then.

As stated above. Welcome newb now post tits or GTFO