Ran the 95 Cobra at Kennedale Tonight

[Diabolic]

With my Summitomo street ties out back.

60'.......2.106
330'.....5.408
Mph.....65.8
1/8......8.257
Mph.....87.21

I think it could have some 7's in it with drag radials. It's NA and my daily driver. Think I'm gonna get some 305/35/18 Nitto drag radials and shoot for 7.8's. Car weighs 3550 with me in it, and tonight I also had a floor jack and cooler in the trunk so probably close to 3600lbs.

[slownbmta]

That's pretty good on regular street tires, what's the combo?

[slownbmta]

Oh, and you should knock .5-.6 off the 60' with good tires

[Diabolic]

B cam, FMS headers, and no cats.

[Diabolic]

I figure about 400-425hp. I have to roll up to 4500 rpm at half throttle and slipping the clutch in first, then completely let off hitting 2nd before matting it. I think 88mph could maybe possibly be in the cards with some DR's. I saw a guy with some 15x8" welds and Mickey T DR's but I don't want 15's. Next set of rear tires I'm going 18x10" Cobra R wheels. I will most likely buy some DR's for those and give it a whirl. My back tires are 315's and new but I drive it 1500-2500 miles a month, so it shouldn't take long.

[91CoupeMike]

B cam, FMS headers, and no cats.

Lol

Runs good man. Hopefully mine will run good when it's done.

It will just have headers and a tune.

[Diabolic]

The new A5 trans holds up well and shifts smooth. Now I drive like Steve McQueen. Mike what's the new combo gonna be?

[91CoupeMike]

The new A5 trans holds up well and shifts smooth. Now I drive like Steve McQueen. Mike what's the new combo gonna be?

1.94 brodix 5.0 st r, Anderson b25, systemax, accufab race 70mm tb, 90mm lightning maf, anderson power pipe, bbk longtubes..

[Diabolic]

What's the specs on that cam? Cc of the heads? Who's tuning it?

Should get you 325-355 at the flywheel. It will run good. I'd mill the heads to 57cc to get closer to 9.8:1 compression.

[SEB]

Man nice times for sure, I am thinking about jumping on that deal Summit has on Trick Flow heads. I already have Holley Systamax Intake, Just not sure I want to spend money on this car yet. I do have BBK Longtubes ready to go in along with a 3inch Pro Chamber H-Pipe with a Mac Catback

8.20s @ 87 is getting it for just B-Cam & Headers! Of course you have the Good GT40 Heads & Intake & 1.7 Rockers. I bet it sounds good at idle. I love B-Cams

If I do put Heads on my Coupe I want to run the N.41 cam

[91CoupeMike]

What's the specs on that cam? Cc of the heads? Who's tuning it?

Should get you 325-355 at the flywheel. It will run good. I'd mill the heads to 57cc to get closer to 9.8:1 compression.

218/226 510/510 112
60cc
True street.

My main question on milling is, will that much effect intake fitment? Pvc? I would love to get them ported and 2.02 valves. They flow ALOT at that point.

http://www.brodix.com/heads/st.php

[Diabolic]

I would have the machine shop verify the cc. I have some AFR 165's that were suppose to be 60cc and were actually 63cc.

[91CoupeMike]

I would have the machine shop verify the cc. I have some AFR 165's that were suppose to be 60cc and were actually 63cc.

I took them up to a local engine building shop when I first got them and as soon as I mentioned anything about gasket matching, or any kind of work they said "we don't do performance applications, which is crap! I think they thought I was wanting them HOGGED out.

Where's a good place In ft worth area?

[Diabolic]

I use Charles auto machine locally, and House of Hotrods in Mansfield has a nice machine shop.

[zemog]

Man nice times for sure, I am thinking about jumping on that deal Summit has on Trick Flow heads. I already have Holley Systamax Intake, Just not sure I want to spend money on this car yet. I do have BBK Longtubes ready to go in along with a 3inch Pro Chamber H-Pipe with a Mac Catback

8.20s @ 87 is getting it for just B-Cam & Headers! Of course you have the Good GT40 Heads & Intake & 1.7 Rockers. I bet it sounds good at idle. I love B-Cams

If I do put Heads on my Coupe I want to run the N.41 cam

i ran the n-71 with the tf street heat and systemax intake, 9.1 comp with 5spd....best 1/4 was 11.7 @ 114 (in think on mph). 1/8 best was a 7.40 ..91 gt on slicks 4:30 gears