Stock 2011 v6 vs h/c/I coupe.

[SVT Lurch]

I dont need slicks

[Broncojohnny]

Lol at a 1.85 60 ft. on slicks.

Mickey Thompson called, he said FUCK YOU!

[Cobraman]

I dont need slicks

Why not when you probably have some laying around mr.parts king?

Lol.

[Cobraman]

Nope I'd like to see that v6 get remotely close to 8.5 and I'll be impressed.

305 flywheel hp at 3500lbs.. Lol

With 3.12 gears or whatever too lol

[91CoupeMike]

wht boy may not have spent much time on the track, but he has had more mustangs then 50% of this forum has had combined. i have zero doubt that if he says he beat a HCI car, then he did it.

If that's the case it was probably the h/c/I he was trying to sell me that was a pile of shit.

A decent running aluminum headed 302 with a intake to match and a cam should be around 300rwhp. That's more then the v6 and it weighs 500lbs less.

[91CoupeMike]

I dont need slicks

Go run 8.5 then.

Better yet run a 9.0

[SVT Lurch]

That's more then the v6 and it weighs 500lbs less.

It's a good thing those are the only factors that determine the winner of a drag race.

[46Tbird]

My best was a 8.52 at 1.86 60ft.

Yep I can't drive.

I know. I already said that.

Why did you go around like you had a lit tampon when you were just going to end up agreeing with me?

[91CoupeMike]

With 3.12 gears or whatever too lol

Top speed? Depending on the set up, a trickflow top end kit to be basic should go over 6k and with 373s thats over 120.

And by 120 there would be bus lengths.

[91CoupeMike]

It's a good thing those are the only factors that determine the winner of a drag race.

Both drivers perfect.

Come on.. It's okay to admit you were wrong.

This is dumb.

The new v6 is in the 13s in the 1/4.

H/c/I coupe is deep in the 12s...

[91CoupeMike]

Lol at a 1.85 60 ft. on slicks.

Mickey Thompson called, he said FUCK YOU!

Lol @ they're old.

Lol at 8.5?

[SVT Lurch]

Should a properly set up H/C/I fox coupe beat a bone stock 2011/2012 V6? Yes.

Will whiteboy's slightly modded 2011 V6 beat your slightly modded coupe? Yes.

Just like post #5 said.

I agree this is dumb, but only because it's still being discussed.

[91CoupeMike]

Check out that tire spin.

[91CoupeMike]

Should a properly set up H/C/I fox coupe beat a bone stock 2011/2012 V6? Yes.

Will whiteboy's slightly modded 2011 V6 beat your slightly modded coupe? Yes.

Just like post #5 said.

I agree this is dumb, but only because it's still being discussed.

Lol. His isn't slightly modded.

And unless he pulls away from 2011 v6 camaros with a swiftness he won't pull away from my pos.

[Whiteboy]

Top speed? Depending on the set up, a trickflow top end kit to be basic should go over 6k and with 373s thats over 120.

And by 120 there would be bus lengths.

The v6 rev's to 7k rpms and has a 6 speed.

The car i raced was gt-40x heads,tubular GT-40 intake e-cam exhaust and gears That combo makes bout 275-280.

I can drive on the street.