Stock 2011 v6 vs h/c/I coupe.

[91CoupeMike]

can you run a 10?

No

Centri 4.6s will run 10s if the suspension is in good condition. Record for a stock centri b headed engine is in the mid 9s

Will it run a 10 at 400rwhp.

No.

I'd say a low 8 in the 1/8th mile. Or a low 12 to mid 12 in the 1/4.

[DON SVO]

non-intercooled vortech S trim cobra, right?

[FoxBodyNick]

basic low boost Centri 4.6 with gears wont touch a ten...rephrased

[majorownage]

3.125'' pulley and intercooled and you will blow his doors off

[DON SVO]

3.125'' pulley and intercooled and you will blow his doors off

So he has a 3.125 pulley and an intercooler?

[SVT Lurch]

So he has a 3.125 pulley and an intercooler?

No, it's non-intercooled and I imagine it will be the stock 3.33" pulley.

[slownbmta]

Mod motors suck

[Cobraman]

non-intercooled vortech S trim cobra, right?

Yeah. Vortech v-2. Looking at about 400-420rw, Maybe more if I want to test my stock internals. 4.10 gears. Dr's. lca's, sperical uppers etc.

[majorownage]

No, it's non-intercooled and I imagine it will be the stock 3.33" pulley.

if the vortech was from a non-intercooled setup, it would have a 3.6 pulley. Intercooled setups had the 3.33 I believe.

[FoxBodyNick]

i dont know what logic people are basing their decisions off of by voting that the v6 will beat a HCI 5.0 coupe...lol ridiculous...

[Cobraman]

No, it's non-intercooled and I imagine it will be the stock 3.33" pulley.

Stock is 3.6

[Cobraman]

if the vortech was from a non-intercooled setup, it would have a 3.6 pulley. Intercooled setups had the 3.33 I believe.

I have both.

[majorownage]

Stock is 3.6

Yup.

I still think you could be him. It'll put down 400 somewhere around 6200. Shift at 7k if your t45 will let you. lol

[Steve]

can you run a 10?

No

Centri 4.6s will run 10s if the suspension is in good condition. Record for a stock centri b headed engine is in the mid 9s

LOL, yes. My car and his car completely different animals. My car will rape his silly and he knows it. The only thing his car and mine have in common is that they are both 4.6 mod motors, but that is where is ends.

[SVT Lurch]

if the vortech was from a non-intercooled setup, it would have a 3.6 pulley. Intercooled setups had the 3.33 I believe.

Stock is 3.6

I bought intercooled and it was 3.33...didn't realize they shipped differently.