Tightening the Strut

[A+]

Ended up grinding the sumbitch off. Damn thing wouldn’t budge! Now I need to tighten the thing up 🥺

[A+]

Finally got another adult to help me tighten up the Fox struts on this 95. Y’all think this is enough?passenger side driver side

[fordracing19]

Why is it spinning when you have a slot in the top to hold it?

Sent from my SM-N950U using Tapatalk

[A+]

Why is it spinning when you have a slot in the top to hold it?

Sent from my SM-N950U using Tapatalk

It was spinning when I hit it with an impact but I held it with a flat head and had another person tighten it up with a crescent wrench, this time.

[A+]

Well, I got both sides screwed on about 3-4 threads down. I didn’t if that was sufficient but KYB said as long as their torqued down to 50ft/lb, they should be good. I tightened them down as much as I could. Probably way more than 50 ft/lb

[line-em-up]

An impact will run it down.

x2 That's what I have used a few times.