What we are working on this week....

[turbostang]

We've finally got to a point where we could actually work on cars, as opposed to moving in and making the shop workable. Right now, the first job, was a complete 25.5 change over (installing a Wolfe 25.5 kit).



Next, some work I did right before moving into the shop - a Vortech discharge mod to be used with an intercooler. (intercooler / cold side install coming up)



Last but not least, a nitrous intake that's had some welding done on it to better match the intake runners to the heads. (I didn't do the nitrous nozzle bungs)

[Mysticcobrakilla]

Glad to see things are up and running.

Also happy to see that you are a Wolfe racecraft dealer.

[1fast4]

All great shops need a bright orange BFH!!!

Good to hear you're up and running finally. Congrats again on making the decision to do it.
I'm sure with your rep there will be PLENTY of business for ya!!!!

[turbostang]

Thanks guys!

John, that hammer is very important. It makes things fit where they normally dont!!

[8mpg]

Rock on Brooks...please keep updating with pics.

[Mike]

Cool thread idea!

updates?

[Lason]

Very cool B!

[turbostang]

I have some pretty cool updates, I'll post them later tonight or tomorrow maybe.

[mk5.0]

Badass man , I got some work I will be sending your way.

[Cooter]

Thanks guys!

John, that hammer is very important. It makes things fit where they normally dont!!

I have a 3lb Eastwing on the service truck affectionately named "make-fit"

[Z06killinsbf]

Very nice, I always enjoy seeing your quality of work. Best of luck to you.

[slowbrick2]

keep going.I want an EFI setup for the wagon.

[Mysticcobrakilla]

Updates?????

[turbostang]

Yes sir, we sure do have some updates - I just haven't put them up here yet. The blue car is almost done and we have two TT projects we are working on - but if I put pics up, you'd be hard pressed to find the 'progress'.

soon.....

[turbostang]

Here's the end of this particular thread as far as updates goes - there will be a new thread with some cool ass projects..

Miguel's cage now complete. We added a tubular seat mount, grounding lugs to the cage, and custom torque box bars/plates.



The round bar running through the floor along side the frame rail and behind the diagonal piece is the one that goes through the torque box to the plate we added.



Last but not least, a fender exit header for a nitrous car. More to come on this one.