Tweet
I've been looking over google and I can't really find a good parts list.
I know I need need:
Eaton Supercharger and pulley
Whole Intercooler setup?
A new throttle body and plenum?
03/04
03/04 CAI?
03/04 heads ( reusing my cams)
03/04 lower intake
03/04 39# injectors
A coolant crossover
SVT Focus Fuel pump
90mm Maf - Do I need it?
Dyno tune
This is the list I pulled from another board, Ford prices are included. I figure finding a parting out 03 may help lol
Crank pulley/harmonic balancer $225.00
Washer for balancer 1 $2.75 Yes
Bolt for balancer 1 $4.39 Yes
Supercharger crank drive pulley
Pulley bridge assembly (w/tensioner and 2 idlers). 1 $201.00
Pulley bridge bolts. $5.50
Idler pulley pass side timing cover. 1 $14.26
Idler pulley driver side. $14.24
Timing cover (tensioner and pulley on DS). 1 ? $380.00
Timing cover seal.
Tensioner on timing cover. 1 $43.21 Comes with timing cover assembly new.
Radiator hose 1 $18.98
Radiator hose 1 $21.27
Radiator hose 1 $15.18
Water cross over pipe 1 $22.78
Cobra oil cooler adapter 1 $93.54
Cobra oil cooler. $238.48 .
IAT sensor connector. $26.83
Intercooler hard lines that hug the block
Intercooler hard lines that come from the h/e 1 ?
Intercooler line that goes from the i/c adapter to i/c res. 1 $12.86
Intercooler line that goes from the i/c adapter to the hard lines that hug the block 1 $10.88
Intercooler line that goes from the hard line against the block to i/c pump(included w/ the hard line that hugs the block if purchased new) 1 $11.87
Intercooler line that goes from hard line to hard line 1 $11.37
Intercooler line that goes from hard line from h/e to i/c pump 1 $7.92
Intercooler line that goes from hard line and connects to h/e 1 $7.92
Intercooler line that goes from hard line and connects to h/e 1 $7.92
Heat exchanger
Heat exchanger mounting bracket. 1 $155.00
AA Bracket clamps for heat exchanger (2) 2 $27.02
Lower manifold to IC water adapter.
Plenum. 1 $311.52
Intake tube from MAF to TB. 1 $54.48
IAC Valve 1 Can I use stock?
Throttle cable. 1 $24.60
Throttle and cruise control cable mounting bracket.
AB EGR valve. 1 $57.31
AD EGR tube. 1 $45.09
PCV tubing
Sensor on the back of S/C. 1
Bracket for vacuum lines on L/S of SC. 1
Hoses/cluster of connectors for vacuum parts. 1
Timing cover gaskets
Lower intake to S/C gasket. 1 $14.29
Plenum to S/C gasket. 1 $8.79
P/S reservior bracket. 1 $196.86
I/C resivoir tank i/c pigtail
S/C 8 rib belt
inner acc. belt.
This makes the Vortech look like a better idea...
I know I need need:
Eaton Supercharger and pulley
Whole Intercooler setup?
A new throttle body and plenum?
03/04
03/04 CAI?
03/04 heads ( reusing my cams)
03/04 lower intake
03/04 39# injectors
A coolant crossover
SVT Focus Fuel pump
90mm Maf - Do I need it?
Dyno tune
This is the list I pulled from another board, Ford prices are included. I figure finding a parting out 03 may help lol
Crank pulley/harmonic balancer $225.00
Washer for balancer 1 $2.75 Yes
Bolt for balancer 1 $4.39 Yes
Supercharger crank drive pulley
Pulley bridge assembly (w/tensioner and 2 idlers). 1 $201.00
Pulley bridge bolts. $5.50
Idler pulley pass side timing cover. 1 $14.26
Idler pulley driver side. $14.24
Timing cover (tensioner and pulley on DS). 1 ? $380.00
Timing cover seal.
Tensioner on timing cover. 1 $43.21 Comes with timing cover assembly new.
Radiator hose 1 $18.98
Radiator hose 1 $21.27
Radiator hose 1 $15.18
Water cross over pipe 1 $22.78
Cobra oil cooler adapter 1 $93.54
Cobra oil cooler. $238.48 .
IAT sensor connector. $26.83
Intercooler hard lines that hug the block
Intercooler hard lines that come from the h/e 1 ?
Intercooler line that goes from the i/c adapter to i/c res. 1 $12.86
Intercooler line that goes from the i/c adapter to the hard lines that hug the block 1 $10.88
Intercooler line that goes from the hard line against the block to i/c pump(included w/ the hard line that hugs the block if purchased new) 1 $11.87
Intercooler line that goes from hard line to hard line 1 $11.37
Intercooler line that goes from hard line from h/e to i/c pump 1 $7.92
Intercooler line that goes from hard line and connects to h/e 1 $7.92
Intercooler line that goes from hard line and connects to h/e 1 $7.92
Heat exchanger
Heat exchanger mounting bracket. 1 $155.00
AA Bracket clamps for heat exchanger (2) 2 $27.02
Lower manifold to IC water adapter.
Plenum. 1 $311.52
Intake tube from MAF to TB. 1 $54.48
IAC Valve 1 Can I use stock?
Throttle cable. 1 $24.60
Throttle and cruise control cable mounting bracket.
AB EGR valve. 1 $57.31
AD EGR tube. 1 $45.09
PCV tubing
Sensor on the back of S/C. 1
Bracket for vacuum lines on L/S of SC. 1
Hoses/cluster of connectors for vacuum parts. 1
Timing cover gaskets
Lower intake to S/C gasket. 1 $14.29
Plenum to S/C gasket. 1 $8.79
P/S reservior bracket. 1 $196.86
I/C resivoir tank i/c pigtail
S/C 8 rib belt
inner acc. belt.
This makes the Vortech look like a better idea...
Comment