Announcement

Collapse
No announcement yet.

Victor Jr Heads & Vic EFI Intake

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Victor Jr Heads & Vic EFI Intake

    Anyone running this combo? Maybe with some 1 3/4 longtubes, 90mm tb, 90mm LMAF meter, 10.5 Comp ratio, and a cam with high 220's to high 230's duration? Anyone running a stroker with these parts?

  • #2
    Compression is a lil high, but should be a good combo.
    Are they the Chapman heads ???
    They flow really nice numbers.

    Comment


    • #3
      I was just thinking out of the box Eddy Vic Jr heads with upgraded springs, and an untouched Eddy Vic Jr EFI intake. The intake that looks like the same style as a stock Cobra intake.

      Comment


      • #4
        Greg's old car, greyhorse ran a similiar 331combo with an Anderson n91 cam with good results. Used the Tfs r intake with the 90 mm throttle body. I think 6.9 on motor and 6.3-4 on spray.

        Comment


        • #5
          Cam seems a little small. Someone over at sbftech.com may be able to help you out.

          I would run the FAC TW's before the Vic Jr's though.
          Putting warheads on foreheads since 2004

          Pro-Touring Build

          Comment


          • #6
            Originally posted by Z06killinsbf View Post
            Cam seems a little small. Someone over at sbftech.com may be able to help you out.

            I would run the FAC TW's before the Vic Jr's though.
            thats a pretty good sized cam, hes not talking advertised...id rather have a vic jr for his setup
            Ring and pinion specialist

            Comment


            • #7
              Cam specs

              ISKY Camshaft Specs# 371275/284
              Dur@.50 228/238
              LSA 112º
              Lift 520/544
              Valve Overlap 9º

              With the 1.7's my lift is roughly .553 and .577.

              Comment

              Working...
              X