Victor Jr Heads & Vic EFI Intake

[Diabolic]

Anyone running this combo? Maybe with some 1 3/4 longtubes, 90mm tb, 90mm LMAF meter, 10.5 Comp ratio, and a cam with high 220's to high 230's duration? Anyone running a stroker with these parts?

[holeshot]

Compression is a lil high, but should be a good combo.
Are they the Chapman heads ???
They flow really nice numbers.

[Diabolic]

I was just thinking out of the box Eddy Vic Jr heads with upgraded springs, and an untouched Eddy Vic Jr EFI intake. The intake that looks like the same style as a stock Cobra intake.

[Magnimike1]

Greg's old car, greyhorse ran a similiar 331combo with an Anderson n91 cam with good results. Used the Tfs r intake with the 90 mm throttle body. I think 6.9 on motor and 6.3-4 on spray.

[Z06killinsbf]

Cam seems a little small. Someone over at sbftech.com may be able to help you out.

I would run the FAC TW's before the Vic Jr's though.

[greenbullitt]

Cam seems a little small. Someone over at sbftech.com may be able to help you out.

I would run the FAC TW's before the Vic Jr's though.

thats a pretty good sized cam, hes not talking advertised...id rather have a vic jr for his setup

[Diabolic]

Cam specs

ISKY Camshaft Specs# 371275/284
Dur@.50 228/238
LSA 112º
Lift 520/544
Valve Overlap 9º

With the 1.7's my lift is roughly .553 and .577.