Announcement

Collapse
No announcement yet.

Shift Solenoids PA Full Manual Valvebody

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Shift Solenoids PA Full Manual Valvebody



    To activate overdrive I apply power to SS1 and SS2 at the same time, yes? What do I do with SS VPWR?

    To activate converter lockout, I ground TCC and apply power to TCC VPWR?

    Thanks,
    J
    '95 GT
    I fucked the Olsen twins before they were famous.

  • #2
    The way I read it is to connect SS1, SS2 and TCC all to a ground source. Then connect VPWR and VPWRTCC to a switch to supply 12V when you want to use overdrive and converter lockup. It recommends that you use them together.
    sigpic

    Comment


    • #3
      what are you trying to do?
      Ring and pinion specialist

      Comment


      • #4
        Originally posted by greenbullitt View Post
        what are you trying to do?
        Overdrive and converter lockup.

        What Cat D said makes sense. I'm probably just reading the directions wrong.
        '95 GT
        I fucked the Olsen twins before they were famous.

        Comment


        • #5
          Originally posted by Rough Customer View Post
          Overdrive and converter lockup.

          What Cat D said makes sense. I'm probably just reading the directions wrong.
          I would not lock the convertor at the same time, I would lock it after the od shift imo
          Ring and pinion specialist

          Comment


          • #6
            Originally posted by greenbullitt View Post
            I would not lock the convertor at the same time, I would lock it after the od shift imo
            Yeah I already set up the switch panel in the ash tray location I just have to figure out what to power and what to ground. I have one switch for OD, one switch for Lockup and one switch that ties the two together on the first switch. I might end up setting up a 2 second timer so that one switch will activate overdrive and then 2 seconds later lock the converter. Like you, I do not like the idea of shifting and locking up at the same time. It just doesn't seem like good practice.

            J
            '95 GT
            I fucked the Olsen twins before they were famous.

            Comment

            Working...
            X