Trick Flow heads??

[slow90lx]

What the difference between the Twisted Wedge and the Twisted Wedge Track Heat?

[fbodyjohnny]

in for info on this one, what site are you looking at to compare them? most sites that sell stuff like that will give specs and reasons for application.

[351Coupe]

http://www.trickflow.com/egnsearch.asp?N=400098++4294925232+4294908331+115+340123&autoview=sku

http://www.trickflow.com/egnsearch.asp?N=400098++4294925232+4294908331+115+340113&autoview=sku

Looks like the valve springs. The track heats have dual springs supporting up to .600 lift.

[306notch]

The Track heats also dont have smog ports.

[slow90lx]

If I'm planning to go carbed then there is no reason to have the smog ports right??

[greenbullitt]

If I'm planning to go carbed then there is no reason to have the smog ports right??

correct...unless you want a smog pump with your carb lol

[sickpony]

What about egr passage? The track heats do not have it.

[greenbullitt]

What about egr passage? The track heats do not have it.

nope, not that i recall

[slow90lx]

Heads are on order. Trick Flow Track Heat heads with a Fox Lake Stage 4 port. Thanks for the help guys.

[VETTKLR]

What are they going on?

[Spector93]

Track heat heads are a aluminum version of the old iron highports design

[slow90lx]

Planning a 408 build. As for now nothing getting everything together.

[Txstang1]

Heads are on order. Trick Flow Track Heat heads with a Fox Lake Stage 4 port. Thanks for the help guys.

How much did those set you back ?

[VETTKLR]

Planning a 408 build. As for now nothing getting everything together.

Nice

Track heat heads are a aluminum version of the old iron highports design

That used to be the case. These are actually twisted wedges with a bigger, better valvetrain. I gotta admit, I thought the exact same thing as you did, when I clicked on the thread.

I'm gettin' to where what I know is old school, I guess LOL

[Damnittsteve]

How much did those set you back ?

im guess 2g after tax