Anyone know of a good shop in the midlothian area? Ive tried tried fixing the car myself but I believe I've gotten in over my head.
Announcement
Collapse
No announcement yet.
midlothian shop?
Collapse
X
-
I'm not exactly sure whats wrong with the car. it started as a severe stumbling on acceleration to the point it was un drive able. replaced the maf, plugs + wires + cap rotor, pip sensor. the car would start and run like shit with maf unplugged. plugging in the maf caused the car to die. tried a pro m and a oem piece.
last weekend I changed out the tps and now the car will not start. it will crank and sputter for a second but dies shortly after. no change in unplugging the maf.
cars a 94 5.0
e-cam
stock heads n block (I know... bought it this way)
pro m maf cal to 19lbs with stock injectors.
tf intake
bbk 70mm tb
3.73s
flow 40s dumped.
egr/cats/smog removed.
Comment
-
Originally posted by projectPONY View PostCan't really tell for sure but that has to be Coco(sp).
edit: this is cocoLast edited by bonnie&clyde; 03-20-2011, 12:34 PM.
Comment
-
-
-
US assemblers in East Gate
ask for Will, he's my son
972-723-2756Last edited by jyro; 03-22-2011, 10:53 PM.Don't worry about what you can't change.
Do the best you can with what you have.
Be honest, even if it hurts.
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy; Its inherent virtue is the equal sharing of misery" ... Winston Churchill
Comment
Comment