Oil pan removal...

[slowyellow]

I have a Moroso 7 qt oil pan on my 331 storker. I can't get the back two bolts off and I can't find any info on how to get at them. They are actually inside of the pan. I can see down to them, but can't figure out what type of fastener head is on them. any help would be awesome. Thanks.

[greenbullitt]

I have a Moroso 7 qt oil pan on my 331 storker. I can't get the back two bolts off and I can't find any info on how to get at them. They are actually inside of the pan. I can see down to them, but can't figure out what type of fastener head is on them. any help would be awesome. Thanks.

theres plugs in the bottom of the sump you remove to access those bolts.

[slowyellow]

Yeah, I saw those and removed them. I can't see well enough to figure out what kind of fastener it is.

[greenbullitt]

Yeah, I saw those and removed them. I can't see well enough to figure out what kind of fastener it is.

if its the rear most bolts, they should be 1/2 inch

[slowyellow]

I can't fit a 1/2 socket in the hole. And it almost looks like a safety torx.

[turbostang]

I HIGHLY doubt they are safety torx bits inside the oil pan. Most likely, the rear most bolts are 1/4 allen, and if it's the smaller ones, it's going to be a 3/16" allen.

[Cooter]