Announcement

Collapse
No announcement yet.

Fuel sending unit replacement

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Fuel sending unit replacement

    Has anyone ever replaced a fuel sending unit that is accessed on the top of the tank without pulling the tank? How hard is this gonna be? Lol. Or is it virtually impossible and I must pull it?

  • #2
    No idea, I replaced mine when I had the tank out to replace the pump. Good luck.
    Originally posted by stevo
    Not a good idea to go Tim 'The Toolman' Taylor on the power phallus.

    Stevo

    Comment


    • #3
      I’m going to check the ground before I do anything serious. The gauge will read fine when the car is off but as soon as I turn it over it jumps to F. It also read almost empty when I got the car, which was accurate. Then early on when I got it running again and when I was tuning it and getting the carb set while revving it, that’s when it jumped to F. I think it’s a possibility that the ground is loose.

      Comment

      Working...
      X