Tweet
So this Honda Odyssey has a HP line adapter that connects to the compressor. I couldn’t get mine off so I cut the sob out! But I accidentally cut a piece of it which I ended up fixing with some JB Weld (I think). Well, I had a leak so I figured I would shoot a can of sealant down the line and it worked well. AC blew cold for a week! Then not so cold.
I know that everyone hates these leak sealers but hey, it worked. SO! I sprayed another one in and it gave me 2 weeks of cold air until it stopped again. Now it doesn’t work again so I removed the compressor to make sure my little rig was still holding up and it was and I also switched out the o-ring on the HP line to a fatter one. Pushed 2 cans of Freon through the system and that SOB was purging like it was running nitrous! I took it to one of those Kwik Kars to check it out and the guy said that I probably clogged up the system with those leak sealers. So if the system is clogged up, Where should I start replacing parts?
I know that everyone hates these leak sealers but hey, it worked. SO! I sprayed another one in and it gave me 2 weeks of cold air until it stopped again. Now it doesn’t work again so I removed the compressor to make sure my little rig was still holding up and it was and I also switched out the o-ring on the HP line to a fatter one. Pushed 2 cans of Freon through the system and that SOB was purging like it was running nitrous! I took it to one of those Kwik Kars to check it out and the guy said that I probably clogged up the system with those leak sealers. So if the system is clogged up, Where should I start replacing parts?
Comment