stripped nitrous plate fitting

[GeorgeG.]

Is there any way to repair this or am I stuck buying a new plate?

[Sleeper]

I'd call the maker if still around. The smart way would be make it where you could replace.

[naynay]

take that fitting to a hose parker store and find a replacemnent, or call the mfg and get another nozzle. but that is about a $20 fitting that does one simple job. make it work.

[orphan Shelby]

Is the tube part pressed into the fitting? May be a manufacturer part only. Just epoxy the threads and jam the fitting on there. Or throw it away if your not really gonna use it

[AArod]

95% sure I have one of those plates. I'll look tomorrow when I'm at the shop. Nitrous works?

[GeorgeG.]

Yeah, Nitrous Works. The tubes looks to be pressed in on the inside. I'd like to get it working, just need to get my options figured out with this piece and get it wired back in. I'd have to look at the pills but I think it's a 100 shot.

[NoClassic]

It looks like there is a roll pin within the letter E. Maybe press it out and pull the fitting. I would just buy a new plate if they cant provide a replace fitting. Just not worth messing around with potential fuel leak.

[GeorgeG.]

It looks like there is a roll pin within the letter E. Maybe press it out and pull the fitting. I would just buy a new plate if they cant provide a replace fitting. Just not worth messing around with potential fuel leak.

I've been googling trying to find another plate but haven't been successful in my search.

[GeorgeG.]

95% sure I have one of those plates. I'll look tomorrow when I'm at the shop. Nitrous works?

Any luck? Yeah, Nitrous Works.

[robert]

Try Matt, he's here on this site(Civic LS Build), if he can't fix it no one will.

[AArod]

Sorry man never made it to the shop. I'll check tomorrow morning.

[AArod]

I did find that plate.

[JETFAST]

make sure you get another B nut, because the threads are probably messed up too, and will more than likely damage the new fitting as well. That fitting on the plate will not be easy to find, but a common style "jetholder" or -3 to pipe fitting could be put in place to work. if you cant find a resolution, let me know. I can more than likely fix it for you.

[GeorgeG.]

Aarod, I may take that off your hands if you're willing to part with it. I'm still working out some issues so it's not nitrous ready. Probably not even tune ready unfortunately. It's running very rich and sounds like I have an exhaust leak. I had a header crack repaired so I'm hoping that didn't fail.