31 spline axles

[wickedblkgt]

Looking to buy some new axles. What is everyone's thoughts, Strange, Moser???

[fastwhite99gt]

I'd try the Moser, I have a set of Strange in my 99 and have already bent the right one.

[wickedblkgt]

I'd try the Moser, I have a set of Strange in my 99 and have already bent the right one.

What is your set up, HP#'s?

[wickedblkgt]

Has anyone herd of Alloy USA?

[fastwhite99gt]

It's a 99 Gt, I bought Matt's big bore road race set up and tuned it for drag racing. Eaton diff, 31 spline axles, only 3.73's, girdle, T56, and a twin disc clutch. It made 373rwhp, but I think my biggest problem is lack of gear. The trans has a 2.66 first and with the 3.73's in the back, it runs like 55mph in first. Trying to drag race, I could come off the 2-step at 6200 and it would dead hook and bog the car. Best 60' is 1.83, but went 12.31@114. I think the dead hook and bog is what got the axle.

[fastwhite99gt]

The American Muscle SR axles are the same material as all the others I've seen and they are way cheaper, but I don't know if you can run the tone rings for the ABS if you are wanting to keep it.

[Mach1]

Mark Williams if you want the best

[blandnuts]

Has anyone herd of Alloy USA?

I've ran those in my foxbody for years with no issues.

[dee]

I ran strange in my cobra with good luck.

[Lone Star Performance]

We use a lot of Moser Axles in the shop with great success! Strange is also a good reputable brand. Have not used Alloy USA

[wickedblkgt]

I plan on making over 800hp, so I need something good. HPP is building it as we speak.

[fastwhite99gt]

33 spline is about as big as you can go and I think that's going to a spool.