I currently have a DaVinci modified Holley 650 that flows about 730. For a while now I have been thinking it is a little too big for my motor and looking at changing to a true 650CFM carburetor.
I am really looking into getting the Holley Street HP 650 which is a more street friendly version of the HP 650. Does anybody have any experience with this carburetor or have anything thing else they would recommend?
289 C.I. Naturally Aspirated/Pump Gas
AFR 185 CC HEADS
Victor Jr intake ported to match heads
10.4:1 comp
.607/.614 lift solid roller cam
4 speed standard transmission
4:30 rear gear
roughly 3100 lbs race weight with driver.
The current setup with the Davinci carb has run an 11.82 @115 mph.
Any advice would be nice. I want to spend $500 or less and it needs to be street friendly but also work well at the track.
I am really looking into getting the Holley Street HP 650 which is a more street friendly version of the HP 650. Does anybody have any experience with this carburetor or have anything thing else they would recommend?
289 C.I. Naturally Aspirated/Pump Gas
AFR 185 CC HEADS
Victor Jr intake ported to match heads
10.4:1 comp
.607/.614 lift solid roller cam
4 speed standard transmission
4:30 rear gear
roughly 3100 lbs race weight with driver.
The current setup with the Davinci carb has run an 11.82 @115 mph.
Any advice would be nice. I want to spend $500 or less and it needs to be street friendly but also work well at the track.
Comment