Announcement

Collapse
No announcement yet.

Spark plugs

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Spark plugs

    Just put a explorer intake on gasket matched and 70 mm tb and deleted egr ....but having a problem loading up need to know what plugs I should run ...set timing at 14 deg and tps at .96v is there anything else thAt might help?

  • #2
    Loading up ? Sure it's not a big ass vacuum leak or the timing is off?

    What all did you change? Just the intake and throttle body? Injectors or maf?


    Also there are sensors that don't directly swap over from mustang to explorer...

    320rwhp. 7.67 @ 90mph 1.7 60'

    DD: 2004 GMC Sierra VHO 6.0 LQ9 324whp 350wtrq

    Comment


    • #3
      "loading up" is the same thing as a "3/4 race cam"

      Comment


      • #4
        Changed intake only throttle body was on the other intake...I think I found it now I have a ignition problem ....just cuts out for a split sec ...on the loading up it was a vacuum problem I changed the hose for the map sensor and it wasn't tight enough...

        Comment


        • #5
          Now I have to check the dist.for issues with cutting out.

          Comment


          • #6
            Originally posted by JETFAST View Post
            "loading up" is the same thing as a "3/4 race cam"
            kinda like when the vehicle you're trying to start won't "catch"?
            http://www.truthcontest.com/entries/...iversal-truth/

            Comment


            • #7
              Damn thing cranks but it won't turn over

              Comment


              • #8
                "It just cut off!"

                Comment

                Working...
                X