School me on Axles

[wickedblkgt]

I need to beef mine up, is the best way go is with Moser 31spline, or does anyone have experience with someone else?

[ktm300hater]

Any name brand axle is going to be fine. I had Yukon in my foxbody. I have mark Williams in the galaxie

[Blue88Coupe]

You can get some 31 splines out of an explorer that will probably hold up just fine. You can also get the 31 spline LSD and a decent set of gears from the explorer. If you're using a fox body housing. This gets you 5 lug and a stronger set of axles for pretty cheap!

[jetboat]

Moser 31 will be just fine. I've been running the same set for over 10 years.

[Sleeper]

I wont buy another set of mosers again after 2 sets of custom length axles being bent from the get go.

Strange. Yukon, Markwilliams etc.

[Mach1]

Mark Williams if you want the best

[kingjason]

You can get some 31 splines out of an explorer that will probably hold up just fine. You can also get the 31 spline LSD and a decent set of gears from the explorer. If you're using a fox body housing. This gets you 5 lug and a stronger set of axles for pretty cheap!

Yeah I have beat the shit out of several of these with 36 inch tires and 400 plus HP. They are a drop in for a Jeep YJ.

[wickedblkgt]

what are stock 2000 GT axles good for? I won't be doing any launching because of the stock transmission, so I'm wondering if I should wait and build the trans first?

[Mach1]

what are stock 2000 GT axles good for? I won't be doing any launching because of the stock transmission, so I'm wondering if I should wait and build the trans first?

With not so sticky rubber they are good for whatever you throw at them. Big launches on sticky rubber and/or really bad wheel hop/tire shake is what will kill them.

[greenbullitt]

i agree with sleeper

[BlueCoupeRedVert]

My fox length sn95 5 lug hub 31 spline axles are great!

[jyro]

Bent?

I wont buy another set of mosers again after 2 sets of custom length axles being bent from the get go.

Strange. Yukon, Markwilliams etc.

spline twisting is normal in all aftermarket axles, is this what you mean by bent?

[jyro]

This is normal, not going to break unless you reverse the side it's in and it's rotation