Announcement

Collapse
No announcement yet.

Is this enough clearance for the intake valve?

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Is this enough clearance for the intake valve?

    Tags: None
  • #2
    Should be plenty

    Comment

    • #3
      Anyone know how thick the stock trw forged piston crown is that came in the 87-92 5.0?

      Reason I ask is because I'm about .135" maybe .140" into this one. Stock reliefs are about .107"ish.

      Comment

      • #4
        run it
        http://www.truthcontest.com/entries/...iversal-truth/

        Comment

        • #5
          Originally posted by shumpertdavid View Post
          Should be plenty
          What he said
          Interested in being a VIP member and donating to the site? Click here http://dfwmustangs.net/forums/payments.php

          Comment

          • #6
            Yes, you should be fine...
            Originally posted by Silverback
            Look all you want, she can't find anyone else who treats her as bad as I do, and I keep her self esteem so low, she wouldn't think twice about going anywhere else.

            Comment

            • #7
              the valve relief wall isn't a factor, the piston would have to have too much slack to run to ever hit on the side. all you need on the flat is .080 on the intake. https://www.fordmuscle.com/fundamentals/pistontovalve/
              Don't worry about what you can't change.
              Do the best you can with what you have.
              Be honest, even if it hurts.

              "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy; Its inherent virtue is the equal sharing of misery" ... Winston Churchill

              Comment

              Previous template Next
              Working...
              X