Keys locked inside

[svtlght99]

Quick question, ive got to go to work at 2. Figured id tackle this right quick if it will work. Locked my keys in my 93 gt. I cant remember but if I were to rivet out the door handle, would I be able to get to the door rod in order to unlock it? I would try to wedge something between both door and body but its new paint and afraid it will mess up. Dammit, what a dumbass I am.

[dangerous_sep]

6 inch screw driver through the handle slot opening closest to the lock cylinder. Insert n point it towards the lock cylinder and move up as needed. Watching the lock rod in the door panel move up

[mstng86]

will hanger not do the trick? why destroy parts?

[dangerous_sep]

Shouldn't destroy anything going the way I posted

[Sean88gt]

How is this possible?

[svtlght99]

holy sh*t it worked! 5minutes...damn! Thanks for the input

[dangerous_sep]

Cool glad I could help. Shouldn't take but 10 seconds next time haha

[Baron Von Crowder]

holy sh*t it worked! 5minutes...damn! Thanks for the input

you'll never feel safe locking your doors ever again.

[mstng86]

Im going to practice this.

[svtlght99]

10seconds...well maybe because I was searching for the screw driver, haha....damn, that's prob how they got in my 90 back in high school....those mthrf's, I never found her.

[Baron Von Crowder]

Ive done it by drilling the rivet out of the lock cyl retainer in the hatch.

[CJ]

[dangerous_sep]

Ive done it by drilling the rivet out of the lock cyl retainer in the hatch.

Hell all the foxes I've ran through maybe only half had the rivet.
so I would always make it a point to replace the screw with a rivet to make it a little harder if someone was interested in opening the hatch.

[Baron Von Crowder]

Hell all the foxes I've ran through maybe only half had the rivet.
so I would always make it a point to replace the screw with a rivet to make it a little harder if someone was interested in opening the hatch.

yeah, the screw is much easier than drilling the rivet.