Muffler/Exhaust Shop

[CoachB]

Might be hard to tell from pictures, but do you see any reason why a 2-in 2-out cat couldn't be welded inline between the o2 sensor and the flange before the muffler. It's pretty tight but looks doable...

Had A&B in Hurst tell me no, and Miller Muffler in Euless couldn't make up their minds.

[black50]

Phils Muffler will do it

[snacksnack]

Would there be a downstream 02 sensor?

[CoachB]

Would there be a downstream 02 sensor?

There is one o2 sensor at the front of the lowest tube. You can't see it in the picture.

[CoachB]

58150L2 is stamped on the midpipe and Bassani's website says 58150L3 is the same part but with cats. Guess I need to find a Bassani dealer.

But the 58150L3 is a single and not duals???

https://www.lightningforceperformance.com/Bassani_SS_Mid_Pipes_w/Cats_1993-95_Ford_Lightning.html

[UserX]

If you're going to do it, why not go true duals?

[CoachB]

If you're going to do it, why not go true duals?

All I want to do is get cat/cats put on it so it will pass inspection. Hopefully without spending a ton of money. Whatever has to be done for that to happen is fine... I just need it done.

[GeorgeG.]

passing inspection shouldn't be a problem. I have the basanni off road pipe and it passes every year.

[CoachB]

passing inspection shouldn't be a problem. I have the basanni off road pipe and it passes every year.

It passed with flying colors... I don't get it. They didn't even look and the levels were fine...

[jetboat]

Phils Muffler will do it

X2

[GeorgeG.]

Awesome! I don't think most shops look, unless it fails. I even have the smog delete and don't have a problem.