window motor fix

[dumpycapri85]

Tanner the smack thing works I promise. I've had to do it numerous times when it was mine. It only happens when you roll it all the way down and it only happens occasionally. it's like the motor/regulator gets in a bind. The bushings are probably shot causing it to roll up/down funny

My 85 and 86 do the same thing . I just never roll them down past the weather strip .

[Tannerm]

Shweet, ill buy some bushings today off 50resto

[Tannerm]

My 85 and 86 do the same thing . I just never roll them down past the weather strip .

ya, that outside weatherstriping crap is shot on blue balls.

[Tannerm]

Hey Jim, you have any trunk tumbler locking pins? I cant find those damn things anywhere... Im tired of the trunk rattling too! I even replaced the weatherstriping AND the bump stops. But, where the bump stops screw into the hatch, they have started to tear the metal... thats alot of the prob i bet. Anyone got a welder?

[RuStYpNuS]

Might as well order new door swipes and weatherstripping as well lol

[dumpycapri85]

Hey Jim, you have any trunk tumbler locking pins? I cant find those damn things anywhere... Im tired of the trunk rattling too! I even replaced the weatherstriping AND the bump stops. But, where the bump stops screw into the hatch, they have started to tear the metal... thats alot of the prob i bet. Anyone got a welder?

I got a welder . I will have to look thru the fuzzy fox box , I think I might have one .

[dumpycapri85]

Shweet, ill buy some bushings today off 50resto

Once you figure how to fix them then you can come do all mine . lol

[Tannerm]

Might as well order new door swipes and weatherstripping as well lol

Brotha, this g aint made of money! I still desperately need that MSD tach adapter! Plus a timing job and carb tune.

[Tannerm]

Once you figure how to fix them then you can come do all mine . lol

Great, bestowing confidence already J!

[RuStYpNuS]

Your gonna have to tig weld that cause it's pretty thin right there. And you have to order a whole trunk lock kit to get the retaining clip. It's 19.99 at vato zone.

You might try lightly hammering it back in to shape. We might be able to tack it with a wire feed a few times but it won't take much to put a hole in it

[dumpycapri85]

I can do it , the force is strong with this one .

[RuStYpNuS]

Lol we could tack it a bunch then hit it with a grinder and spray some rustoleum on it

Never said it couldn't be done but tiggin it would be best

[dumpycapri85]

Lol we could tack it a bunch then hit it with a grinder and spray some rustoleum on it

Never said it couldn't be done but tiggin it would be best

Leave it to you to want to tigger rig it .

[Tannerm]

Lol we could tack it a bunch then hit it with a grinder and spray some rustoleum on it

Never said it couldn't be done but tiggin it would be best

Sense much fear in this one.

Lemme know when youd like to gtg Jim. Im off till thursday evening.

[80coupe]

Might wanna check plug number 3 why your at it.