Brake line question

[HECDOGGIE]

I have resorted to replacing my brake line on my driver side. THis is needed to relocate my bracket about 5" back ( towards the rear of the car ) to clear my coilover.

I need some info on how to do this..

Can i buy a prebent piece, can i just cut and install using the current one ?

Hector

[Rustang]

Doubtful on anything prebent... You will need to bend your own, you can buy short sections at DECENT auto supplies, and buy a union to screw them together (will need to be the correct fitting that has flare style union) Or you can buy a longer length, use your fittings and make a new one, which is the best way, but you will need a double flare tool.

[bonnie&clyde]

i had to replace the brake lines on my rear end, i went to ACdelco and bought some pre flared lines and just bent them myself, not that hard, and not that expensive, buy some extras so u can practice bending them first

[FOKAI]

Any auto zone or Orileys have made lines buy bender do yourself easy they also have fittings also if needed. Ask for brake hard lines they in the back

[HECDOGGIE]

Thanks for the info guys!