Intake Valves

[86lxttop]

found a good set of heads for a foxbody 5.0. They have 194/154 valves. Double checking to see if these would clear stock pistons...Motor has a bcam and i would most likely run 1.6 rockers. Let me know - James

[Lone Star Performance]

Usually anything bigger than a 1.9 intake valve with have PTV issues. With those specs it sounds like the heads are off an older late 60's early 70's motor. The only way to tell for absolute certain is to put them on and use an Isky tool to check PTV

[86lxttop]

Usually anything bigger than a 1.9 intake valve with have PTV issues. With those specs it sounds like the heads are off an older late 60's early 70's motor. The only way to tell for absolute certain is to put them on and use an Isky tool to check PTV

thanks man!