Bolts size( t56 swap)

[rz5.0]

I was going to do a t56 swap on my 302. I bought the McLeod bell housing. It sat for 6 months. Now actually decided to do it but I can not find the bag with all the hardware that came with the bell housing. Does any one know the sizes of the bolts that come with the bell housing. . Is there anything else came in the bag. .

Sent from my SPH-L710 using Tapatalk

[DFWtechie]

7/16 by14 threads

[Kart21]

7/16 by14 threads

X2

Watch out that the top 2 bolts are shorter than the others so you can get them in or out with the moter in the car. Past experience.

[rz5.0]

Same size as the t5 lenght wise?
what about the ones that go from bell to trans. .

[rz5.0]

Could I reuse some of the ones coming off the t5..

[DFWtechie]

I don't why you couldn't use them, I used the ones form and aode to t5 conversion.

[Skidonenko]

As long as the holes do not have a bottom yes. That bellhousing you are using is stamped steel and thinner than the aluminum ones right?

[rz5.0]

Yes. That's why I was unsure. .
any idea the size for the t56?