08 Bullitt help

[E_Low]

Needing some help/advice. I have a 08 Bullitt and I removed the dual pod gauges that came with and put a stock pillar in. Only thing I did was disconnect the plug in from the obd2 port and pull the cable through. Now the issue

I noticed the reverse lights stay on and the car won't start. I have power (the headlights, interior lights, brake lights, and alarm lock/unlock all work) but the car doesn't even click. The theft light flashes at the normal 2 seconds and not rapidly. Also I no other cluster lights come on (like the odometer, engine light, etc) and I have no power to the radio or windows. What could this be?

Cliff notes: have power/headlights but no radio/windows/instrument and the car wont start, not even click.


Update: I just hit the panic to see if it works, the panic works but I couldn't turn it off/disable the alarm. Had to pull the battery to stop it.

[Skidonenko]

The gauges connected to the OBD port? What gauges were they? Possibly disconnected something under the dash. Did you try to reconnect them and see if it starts?

[E_Low]

Aeroforce gauges that connect to the obd port. I wondered the same thing, and checked but didn't see any thing that looked like it got unhooked.

[E_Low]

There is a 12v box that has a wire tapped into the ignition and on the other part of the box it has 2 green 2 red and black wires that run up toward the radiator.

[Skidonenko]

Where exactly do they lead to? Anything on the box? Does the car have an aftermarket alarm? Does it look like anything on the gauge manufactures website?

Where it is tapped into the ignition module is it just tapped in or was one of the wires cut with one side left disconnected?