Announcement

Collapse
No announcement yet.

Know anyone that can rebuild a carb?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Know anyone that can rebuild a carb?

    I need to find someone that can rebuild a old Cadillac carb. I am not talking about a BS replace all of the gaskets rebuild. I think the carb is off of a 64 Deville.

    I need to get the old thing running again and try and sell the heap.
    Last edited by big_tiger; 07-19-2011, 01:12 PM.

  • #2
    no body???

    Comment


    • #3
      i can do it.

      Comment


      • #4
        Im rezzing an old thread because I never found anyone that can do it. I'd like to get this big caddy running.

        Comment


        • #5
          you selling the eldo?

          Comment


          • #6
            Mister carb in cedar hill on 67
            "If I asked people what they wanted, they would have said faster horses." - Henry Ford

            Comment


            • #7
              pm sent..

              Comment


              • #8
                Weren't those boats equipped with quadrajets?

                Comment


                • #9
                  Originally posted by Johnny Armijo View Post
                  you selling the eldo?
                  Sorry I always fuck that up, its a 64 Deville, and maybe...

                  It needs A LOT of work.
                  Last edited by big_tiger; 07-19-2011, 01:18 PM.

                  Comment


                  • #10
                    Why would you need to do anything more than change the gaskets, change all the springs, etc, and scrub all the old gunk out? If nothing's changed engine wise, you shouldn't need to open any circuits up or anything.
                    ZOMBIE REAGAN FOR PRESIDENT 2016!!! heh

                    Comment


                    • #11
                      I can but I am in Anna... BTW put a new float in!!

                      Comment


                      • #12
                        Originally posted by Yale View Post
                        Why would you need to do anything more than change the gaskets, change all the springs, etc, and scrub all the old gunk out? If nothing's changed engine wise, you shouldn't need to open any circuits up or anything.
                        You have a point. What floats are the bad ones? I know they switch to plastic, and the first ones were junk.

                        Comment


                        • #13
                          Originally posted by Baron View Post
                          Mister carb in cedar hill on 67
                          Danny 972-291-1101,right off the highway

                          Comment


                          • #14
                            Originally posted by big_tiger View Post
                            You have a point. What floats are the bad ones? I know they switch to plastic, and the first ones were junk.
                            Just change every damn thing out. Set the carb at one corner of your work bench, start taking parts off, and lining them up in order. Put little refrigerator magnets everywhere, so you have the right screws next to the right parts. Keep them in the order you disassembled them, and reassemble them in reverse order. It's easy.

                            It's not organized in the slightest, but here's a good rundown on tuning:
                            Last edited by YALE; 07-20-2011, 12:07 AM.
                            ZOMBIE REAGAN FOR PRESIDENT 2016!!! heh

                            Comment


                            • #15
                              This must be Bob's "Million dollar" idea. not bad...

                              Comment

                              Working...
                              X