TKO 600 swap

[crapstang]

I have an opportunity to pick up a new TKO for a pretty good deal, so I'm jumping on it. I have been keeping an eye out for one, because the horrible tr3650s won't stop flying apart.

Now, what will I need to swap this into my '03 Mach 1? I know I need a bell housing, but I'm not sure on the rest of the details. If anyone has important information or pointers, I'm all ears.

[BMCSean]

PM BradM, he did this on his van.

[Whiteboy]

Buy a 6spd

[crapstang]

Buy a 6spd

Why? I liked my '99 cobra with a t56 in it, but I wouldn't pay 1500-2000 for it.
Going through the gears is fun, but at 20-30 lbs heavier and 3x the cost...

[Mach1]

I'm looking for a .82 OD TKO 600, PM me if you got a good source for one.

[crapstang]

I'm looking for a .82 OD TKO 600, PM me if you got a good source for one.

Hehe, that's exactly what I wanted and I'm getting.

If I'm talked out of it somehow, I'll let you have it.

[Mach1]

Hehe, that's exactly what I wanted and I'm getting.

If I'm talked out of it somehow, I'll let you have it.

Cool, I'd also go T56 in a street car or big HP car, it's a superior transmission IMO. I am just looking at the tko for my CMC road race car. A modular bell for the TKO will prob be $500, and you don't get the nice OD on the highway (ignore if you have a non street car)

[crapstang]

Cool, I'd also go T56 in a street car or big HP car, it's a superior transmission IMO. I am just looking at the tko for my CMC road race car. A modular bell for the TKO will prob be $500, and you don't get the nice OD on the highway (ignore if you have a non street car)

It's not too much of a DD anymore, as I rack up all of my commuting miles of the Mercedes. I just want something I can rip at as hard as I can and not blow apart. A local guy offered me his bell housing for $140. I'll keep an eye out for a t56, but at 125-150lbs along with the price, I'm not too eager.

[aggie97]

It's not too much of a DD anymore, as I rack up all of my commuting miles of the Mercedes. I just want something I can rip at as hard as I can and not blow apart. A local guy offered me his bell housing for $140. I'll keep an eye out for a t56, but at 125-150lbs along with the price, I'm not too eager.

Grab it up with the bell housing and if you are interested in a trade, I might swap you my T56. I need to lose some weight in the mustang.

[Blackpony]

I have a t56 for a pushrod 5.0 for sale. Mgw shifter, less then 3k since a rebuild with steel 3-4 shift fork, bronze shift pads, etc. Includes aluminum driveshaft and cross member. If anyone is interested pm me

[Mach1]

I have a t56 for a pushrod 5.0 for sale. Mgw shifter, less then 3k since a rebuild with steel 3-4 shift fork, bronze shift pads, etc. Includes aluminum driveshaft and cross member. If anyone is interested pm me

What gear ratios? PM me a price.

[crapstang]

Grab it up with the bell housing and if you are interested in a trade, I might swap you my T56. I need to lose some weight in the mustang.

Ok! I'll snatch up that bell housing

[MGannaway]

get a gforce 3650 its stronger than a tko 600

[Blackpony]

What gear ratios? PM me a price.

Let me look when I get home. I can't remember of hand.

[Whiteboy]

Why? I liked my '99 cobra with a t56 in it, but I wouldn't pay 1500-2000 for it.
Going through the gears is fun, but at 20-30 lbs heavier and 3x the cost...

I Thought you were a BALLER? Not like the mach is fast or anything