Announcement

Collapse
No announcement yet.

Body mod opinions wanted

Collapse
X
Collapse
 
  • Page of 6
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 4 6 template Next
  • #1

    Body mod opinions wanted

    I am looking more at doing some changes to the front end of the Cobra.

    Here is the canvas as it sits now. Let me hear your opinions. I am trying to avoid a vatozone riced out look to the car's already clean styling (my opinion to the sn95 haters)




    For one, I want to do a heat extractor on the hood similar to this car using the GT500 hood vent. This at a minimum. $60 and a couple hours cutting up a (or my) stock hood.
    pics stolen by corner-carvers





    If not that route, I am looking at some hoods.
    Griggs GR40






    Tiger Racing (Paul Brown, deceased son of Kenny Brown but I hear they make a run of their hoods every so often)



    Bumpers. I like the 03 Cobra bumper, fog light provisions, plus a duct I can use for brake cooling ducting. I also like the larger opening for the radiator/intercooler. Plus, I can find a splitter that will fit this bumper profile unlike I the factory 94/95 Cobra that is hard to find, expensive and goofy looking to boot.

    This is the ABC Exclusive. Out of Wylie, Tx so I can drive there to pick it up, save freight, save freight damage, get the pic of what I want, etc.
    Ford Mustang Bodykits, Ground Effect Kits, Side Pipe Covers & Bumper Covers by ABC Exclusive
    https://www.abcexclusive.com/bodykits_main.htm#co8011fbc
    Mustang Bodykits, Mustang Ground Effect Kits, Mustang hoods, Mustang Wings, F-150 and Dodge RAM after market auto parts manufacturer Expert by ABC Exclusive. Including Mustang Hoods, hoods, hood, hood for Mustangs, hoods for Mustang, Mustang hood, bodykits, body kits, kits for Mustangs, kits for Mustang, Mustang kits, Mustang kit, ground effect kits, ground effect kits for Mustangs, Mustang ground effect kits, Mustang Styling Bars, styling bar, styling bar for Mustangs, Mustang Roll Bars, roll bar, roll bar for Mustangs, Mustang body kits, Mustang body kit, body kits for Mustang, body kits for Mustangs, Mustang Ground Effect Kits, wings, Mustang Wings, wings for Mustangs, wings for Mustang, Mustang Wing, Mustang Bumpers, Bumpers for Mustangs, Bumpers for Mustang, Ford, Ford Mustang, Mustang, Mustang Accessories, accessories for Mustangs, Tonneau Covers, tonneau covers for Mustangs, tonneau covers for Mustang, Mustang tonneau covers, Mustang rear spoilers, Mustang rear spoiler, Dodge Truck Hoods, Ford 150 Truck Hoods, Auto Accessories, Ford Mustang, F-150, Dodge RAM, Body Parts, Automotive Parts, Bumpers, Ground Effects, Hood, Tonneau Covers, Roll Bars, Styling Bars, Motorsport, rear spoiler, Body Kits, Mustang Lights, bodykits for Mustangs, rear spoilers for Mustangs, rear spoilers for Mustang, Mustangs, vertical doors, vertical door, lambo doors, vertical doors for Mustangs, lambo doors for Mustangs, lights, grilles, emblems, Lightning Bumpers, Billet Grilles, F-150 Truck, Cowl, SVO, Black Widow, Aero, Auto Design.

    Last edited by KBScobravert; 09-17-2013, 07:21 AM.
    Fuck you. We're going to Costco.
    Tags: None
  • #2
    I am a big fan of the Griggs GR40 but it is a pin on only hood. bleh, this is a street car and needs to hing up.

    I wouldn't mind a Cervinis Cobra R hood, it is fitting for the era and the wheels but I am really looking for some heat extraction at the radiator just past the high pressure area.

    I am already looking at ditching the factory hood latch for other reasons and going with the Aerocatch latches.
    Fuck you. We're going to Costco.

    Comment

    • #3
      Leave it the way it sits!

      Comment

      • #4
        I'm really liking that GR40 hood, leave the front bumper.
        Detailing is an Obsession!!

        1996 MYSTIC Cobra #405 of 2000

        Fox Coupe "Calypso Killer"

        Comment

        • #5
          Grigs or ABC. The rest of those are just too much rice.

          Comment

          • #6
            Gr40 with the stock front bumper and a Saleen spoiler!!

            Comment

            • #7
              All of those hoods are fucking hideous. I like the GT500 extractor idea. Pretty unique. Or just throw on a 96-98 Cobra hood.

              Comment

              • #8
                Or the 96-98 1" raised cobra hoods look badass. That's what I'm getting... eventually.
                Detailing is an Obsession!!

                1996 MYSTIC Cobra #405 of 2000

                Fox Coupe "Calypso Killer"

                Comment

                • #9
                  96-98 cobra hood. and i know you didnt ask, but i would get shed of that peanut butter int. i hate that.

                  god bless.
                  It is easier to build strong children than to repair broken men -Frederick Douglass

                  Comment

                  • #10
                    Factory Cobra R hood with the GT500 extractor? I have got to get under hood temps down and that extractor has proven itself on cornercarvers and several other sites to help.

                    Again, i am a huge fan of the Griggs but it is pin on only.

                    What about the 03 Bumper? Does it look like it doesn't fit the rest of the body or what?
                    Fuck you. We're going to Costco.

                    Comment

                    • #11
                      Originally posted by ELVIS View Post
                      96-98 cobra hood. and i know you didnt ask, but i would get shed of that peanut butter int. i hate that.

                      god bless.
                      you just jelly.................that it is sooooooooo clean and stock looking.
                      Fuck you. We're going to Costco.

                      Comment

                      • #12
                        Originally posted by kbscobravert View Post
                        Factory Cobra R hood with the GT500 extractor? I have got to get under hood temps down and that extractor has proven itself on cornercarvers and several other sites to help.

                        Again, i am a huge fan of the Griggs but it is pin on only.

                        What about the 03 Bumper? Does it look like it doesn't fit the rest of the body or what?


                        Would not do an 03 Bumper. Once you start going overboard tacking on other era body pieces to a car, it starts looking like it belongs in the Traders Village parking lot. Your car is clean as hell as it sits. Do something simple if the heat is a problem. Don't go crazy. I am one of those wacky people that loves a mostly stock looking SN95, especially the Cobras. Why mess with something that was right from the factory? Do something with the hood and leave it at that. The Cobra R hood is okay, but it is way overdone. Being black, the extractor will semi-blend in unless someone is closely looking at it, plus the functionality of it ups the sleeper cool factor.

                        Comment

                        • #13
                          I agree with Eric.

                          Comment

                          • #14
                            Originally posted by Venom View Post
                            I agree with Eric.
                            Nut swinger!!!!!!1


                            Keep it as factory looking as possible, IMHO. Oh, and HELL NO to the 03-04 cobra bumper. It doesnt match the body style at all.
                            "If I asked people what they wanted, they would have said faster horses." - Henry Ford

                            Comment

                            • #15
                              I have a cervini cobra r hood off my car for sale. It's in perfect shape just needs to be painted to match your car. IMO the cobra r hood flows really well with the rounded body lines on the sn95 cars..

                              Comment

                              Previous 1 2 3 4 6 template Next
                              Working...
                              X