Good Mazda Miata mechanic in Arlington area?

[Leah]

My boss has an 03ish mazda miata and they are needing a good, reliable mechanic in the Arlington area. She asked me if I would ask if anyone had recommendations. PM me or post up. Thanks!

[Mach1]

What do they need?

[Leah]

What do they need?

I'll ask. She didn't say when we were talking so they may just need one on hand in case something is wrong. Just called her and left a message.

[Venom]

I know it's not Arlington but it's pretty close. He's also a board member.

Kwality Auto Lube
930 N. Main St
Mansfield
(817) 473-8655

[Baron Von Crowder]

http://www.autorepairarlingtontx.net/

[talisman]

http://www.autorepairarlingtontx.net/

Lenny is a good guy. I've stopped recommending mechanics. It almost never ends up being helpful.

[95DRGT]

I know it's not Arlington but it's pretty close. He's also a board member.

Kwality Auto Lube
930 N. Main St
Mansfield
(817) 473-8655

+1 Kevin's a good dude

[Leah]

Ok, she said this:

Several concerns,
1) a rumble that needs to be looked at- maybe a wheel bearing
2) the automatic windows closing more and more slowly
3) maybe doing something different with exhaust.

Thanks for the recommendations, I will pass them along.

[Baron Von Crowder]

Several concerns,
1) a rumble that needs to be looked at- maybe a wheel bearing

Get that checked.
2) the automatic windows closing more and more slowly
Lube.

3) maybe doing something different with exhaust.
no.

[Leah]

Several concerns,
1) a rumble that needs to be looked at- maybe a wheel bearing

Get that checked.
2) the automatic windows closing more and more slowly
Lube.

3) maybe doing something different with exhaust.
no.

Her and her husband are both teachers. He just retired and she is close. They wouldn't know what to do with lube if you gave them a map.

[Baron Von Crowder]

Not that kinda lube, hussy.

[Mach1]

Wheel bearings and the windows are very common, I lubed mine and put the special teflon follower wheels and it hardly did shit for the windows. The hubs (wheel bearings) also are a common failure, rears are better but i've still seen a few failures on the rears too.

[MattB]

Wheel bearings and the windows are very common, I lubed mine and put the special teflon follower wheels and it hardly did shit for the windows. The hubs (wheel bearings) also are a common failure, rears are better but i've still seen a few failures on the rears too.

What do you know about Miatas anyway!!

[Grape]

miatas are like harley's, all you need in your toolbox is a hammer and some RTV.

[MattB]

miatas are like harley's, all you need in your toolbox is a hammer and some RTV.

Zip ties, duct tape, oil and gas is all you need for a spec Miata weekend lol.