Announcement

Collapse
No announcement yet.

Engine Diagrams (Fox Body )

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Engine Diagrams (Fox Body )

    Are there any picture diagrams that show where all the wiring under the hood goes ? I have searched and i have found bits and pieces, but nothing whole.



    ((( I Purchased a car with all of the wiring disconnected, and most of the parts pulled down to the heads )))


    Thanks ..

    Hector

  • #2
    computer harness runs along the firewall seam, mass air section of that harness over the top of the pass strut tower, injector harness is self explanatory. o2 sensor harness has "brackets" that bolt to the sides of the block up front.
    Ring and pinion specialist

    Comment


    • #3
      I usually try to find some stock underhood pics, ebay is a good place to find em, most/all of the connectors will only plug in 1 place.
      Interested in being a VIP member and donating to the site? Click here http://dfwmustangs.net/forums/payments.php

      Comment


      • #4
        I've got the factory service manual from 1990 if you want to borrow it. It should be the same or at lease close to it.

        Comment


        • #5
          or you could find a close to stock fox and look at all of the plugs and where they go. Most of them are different shapes and sizes.

          Comment


          • #6
            Originally posted by Venom View Post
            I've got the factory service manual from 1990 if you want to borrow it. It should be the same or at lease close to it.
            I appreciate the offer, i have a haynes manual, i just want to be lazy and find the online pictures with the descriptive arrows.

            I am sure i can figure it all out, i just want to have back up so im not searching last minute on my phone.

            Thanks guys.

            Comment


            • #7
              This might help some...

              http://www.cjponyparts.com/tech-fox-body-engine/a/170/
              1991 5.0 Mustang LX-Hatch, BBK Cold Air Intake, BBK Headers, BBK X-Pipe, Flowmaster 40's, HPM C/C Plates, Cobra Sway-Bar, UPR Subframe Connectors, UPR Control Arms, FRPP Aluminum Driveshaft, FRPP "C" Springs, FRPP 31 Spine Diff, Moser 31 Spline Axles, FRPP 3:73 Gears, Tokico Blue Shocks, King Cobra Clutch, MSD Ignition, Taurus Electric Fan, BBK Gripp Shifter, & More

              Comment


              • #8
                Originally posted by Exile View Post
                Nice... thank you .

                Comment


                • #9
                  These may help a little too:





                  Sent from my SAMSUNG-SGH-I747 using Tapatalk 4

                  Comment


                  • #10
                    Originally posted by danielhv View Post
                    These may help a little too:


                    Sent from my SAMSUNG-SGH-I747 using Tapatalk 4
                    badassssss
                    Interested in being a VIP member and donating to the site? Click here http://dfwmustangs.net/forums/payments.php

                    Comment


                    • #11
                      Originally posted by danielhv View Post
                      These may help a little too:





                      Sent from my SAMSUNG-SGH-I747 using Tapatalk 4
                      Thank you !!!!

                      Comment

                      Working...
                      X