06' KB install..... Kenne Bell

[Rafa]

Finally able to get to work on it. Almost done. Working on gauges now. My son was here for part of summer and kept having family in town, so I just put car on hold. Anyways...here are pics...

Parts from my car and from engine that came with the blower. Thanks MysticCobrakiller....Also motor and bolt on parts will need to go...hint, hint....





Removed battery and the tray. Made it way easier to get to back bolt behind the valve cover.





Had to spend a few hours swapping my U/D pullies for stock ones. Had to run around a few stores trying to find the puller.


We used a Dremal to trim this harness cover. Didn't want to leave wires exposed.



Cutout for the filer/tube. Used electrical tape to cover edges after we sanded down.


Tight fit


Fucking cig flickers........

[Rafa]

Some more wiring. All wiring that was cut, I soldered and used heat shrink.


Before I put manifold on, I forgot to take pics of the heat exchanger and the relocation of the windshield washer bottle. Here's a pic with the manifold on with those installed and the bumper back on. I also swapped my V.covers for some black ones.



Here's with the blower on

[Rafa]

Only pic I have of heat exchanger


Vacuum hose sensor for the boost a pump.


Here she is finished in the engine compartment.


This is where I routed the hose for boost gauge. Goes down below and thru grommet for clutch.

[R1psycho]

Looking good bro

[Rafa]

Thanks man.
Finished up the BAP and working on wiring for my aeroforce gauge I got. Ran the hose from manifold thru firewall.

[Z06killinsbf]

Get it done and come pick me up homie!

[Rafa]

Dyno time is set for the 3rd of next month.
I already talked to HPP about getting a start up tune.

[Juiced4v]

Looking good!! good job!

[Mach1]

badass!

[grove rat]

fuck yea

[Rafa]

thanks peeps...didn't do anything last night. Gonna get back to gauge tonight and try to get a couple more pics uploaded. About to send HPP some info so I can get a startup tune.

[bjtheman1]

Very nice, looking foward to seeing what kind of numbers you put down.

[Unicorn Jeff]

Dyno time is set for the 3rd of next month.
I already talked to HPP about getting a start up tune.

Hey that's my BDAY! And I know why you have that sad face, just think about the positives

[Rafa]

Hey that's my BDAY! And I know why you have that sad face, just think about the positives

No shit..mine is on the 2nd....alcohol time
How's yours doing. I was on vacation for a week and didn't really get back on the board till maybe a 1wk to 1 1/2 weeks ago.

About the dyno day...actually, it works perfect. I can take time and do other stuff. If I have time, I might have time to redo wiring for my amp. If not, it's off to EW to have him do it.

[Unicorn Jeff]

Should be getting mine back later this week LOL. And I thought the sad face was for what happened last year on Sept 3rd