Static 4/6 drop 2001 silverado.

[91CoupeMike]

Truck has a 2/4 on it now, and he wants to go lower.

Any reccendations on a c notch?

Suggestions in general?

[racrguy]

Tell him to talk to Slammy.

[wishitwasasvt]

Spindles, coils out front, blocks and lowering leafs out back?

[91CoupeMike]

Spindles, coils out front, blocks and lowering leafs out back?

Already has spindles in the front, he needs front springs and do a flip on the rear, but needs a c notch. Mainly looking for cnotch recommendations.

[91CoupeMike]

Tell him to talk to Slammy.

Does he slam shit?

Slamual.

[ktm300hater]

Make your own. It's easy and cheap

[91CoupeMike]

Never done this and iffy on frame work.

[shumpertdavid]

I have had great success with the djm rear flip kit stuff I've put in. It's mainly been late model dodges I've done for whatever reason. I didn't have to bother with a c notch because it was a 4 inch drop in the rear (flip kit and adjustable shackles to raises the rear back up). Several companies make bolt in c notches but I'd recommend welding the seams anyway.

Any yes, Slammy slams shit

http://www.dfwmustangs.net/forums/showthread.php?t=6771

[onjacks]

you could get the bolt on c notch kit and have someone weld it. shouldnt be to much.

[wishitwasasvt]

C notches are pretty straight forward if he gets a bolt on notch, but if he plans to bag it in the future a step notch would be best now while he is under there IMO.

[Z06killinsbf]

http://www.mcgaughystore.com/products/Rear-C-Notch-Chevy-GMC-01%252d06.html

Boom

[91CoupeMike]

Guy in Gainesville says if we supply the notch and take the bed off, he will do it for 150.

[Z06killinsbf]

Bring it to me, I'll weld it in for cheaper.

[91CoupeMike]

Bring it to me, I'll weld it in for cheaper.

Might take you up on that deal, I don't have immidiate access to a torch or plasma cutter either.

So shit the bed.

[Z06killinsbf]

I see no reason to pull the bed off just to put in a C notch. A step notch yes, but you'd also have to cut out the bed.