347 stroker cam help

[juic3d]

Trying to figure out what's the best cam for my buddies combo.
347 stock block
Steel billet crank
Je flat top pistons
Afr 185 heads
Main girdle
He'll fire rings

Trying to figure out should we go with a hydraulic cam or solid flat tappet cam

C4 with 3500 stall
4.10 gears
28 inch tall tire
Alittle spray

Would still like to drive car around town.

[AArod]

Anderson n71

[KBScobravert]

Ed Curtis.

[Txstang1]

comp 282

[juic3d]

I have been told by a couple people to go with the comp 282 cam. Would you guys stay hydraulic roller

[majorownage]

Ed Curtis

[spankustang]

Anderson cams make great power!

[dee]

I've always liked the bullet guys stuff.

[STROKD]

Have similar setup with a Comp 274... Id reco the 282 though, it's just a little bit more of the same from the 274.

[DON SVO]

Trying to figure out what's the best cam for my buddies combo.
347 stock block
Steel billet crank
Je flat top pistons
Afr 185 heads
Main girdle
He'll fire rings

Trying to figure out should we go with a hydraulic cam or solid flat tappet cam

C4 with 3500 stall
4.10 gears
28 inch tall tire
Alittle spray

Would still like to drive car around town.

How much static compression?

[juic3d]

Around 11 to 1

[zemog]

n-91 or 111, i ran the 71 in my 302, would be pretty mild in a 347 i would think

[onjacks]

corral has a xe282hr
for sale right now

[DriveWayBuilt]

I would stay Hydraulic and Bullet cams are the way to go !

[thesource]

Another vote for Ed Curtis. Every cam he's done for me has picked up power over the one that was pulled out.