Announcement

Collapse
No announcement yet.

Does anyone have the female to this connector?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Does anyone have the female to this connector?

    I need the female side of this 4 pin connector. Doing a plug in set up for the maf harness.




    320rwhp. 7.67 @ 90mph 1.7 60'

    DD: 2004 GMC Sierra VHO 6.0 LQ9 324whp 350wtrq

  • #2
    Also is it okay to mount a maf upside down?

    320rwhp. 7.67 @ 90mph 1.7 60'

    DD: 2004 GMC Sierra VHO 6.0 LQ9 324whp 350wtrq

    Comment


    • #3
      Whack a plug on an old O2 sensor, which MAF do you have?
      '93 Cobra-Coyote Powered
      '13 Dodge Cummins
      '14 Rubicon X

      Comment


      • #4
        Originally posted by white88 View Post
        Whack a plug on an old O2 sensor, which MAF do you have?
        Lightning maf.

        O2 is only 3 wire :/

        320rwhp. 7.67 @ 90mph 1.7 60'

        DD: 2004 GMC Sierra VHO 6.0 LQ9 324whp 350wtrq

        Comment


        • #5
          You have a tiny male end

          Comment


          • #6
            Originally posted by 91CoupeMike View Post
            Lightning maf.

            O2 is only 3 wire :/
            Damn, well so much for that. Your MAF should be fine mounted upside down. Check out these sites for your connector.

            Del City offers a full range of electrical supplies including wire, cable, electrical terminals, connectors, relays, circuit breakers, electrical wire, fuses, switches, and loom for automotive, truck, trailer, marine and other OEM/MRO applications.


            '93 Cobra-Coyote Powered
            '13 Dodge Cummins
            '14 Rubicon X

            Comment


            • #7
              Originally posted by white88 View Post
              Damn, well so much for that. Your MAF should be fine mounted upside down. Check out these sites for your connector.

              Del City offers a full range of electrical supplies including wire, cable, electrical terminals, connectors, relays, circuit breakers, electrical wire, fuses, switches, and loom for automotive, truck, trailer, marine and other OEM/MRO applications.


              http://terminalsupplyco.com/Default.aspx
              Factory is 3 wire, but the ones az offers are heated, so they are 4pin.

              So I have one now.

              Thanks!

              The maf upside down is okay? Sweet!

              320rwhp. 7.67 @ 90mph 1.7 60'

              DD: 2004 GMC Sierra VHO 6.0 LQ9 324whp 350wtrq

              Comment


              • #8
                Originally posted by 91CoupeMike View Post
                Factory is 3 wire, but the ones az offers are heated, so they are 4pin.

                So I have one now.

                Thanks!

                The maf upside down is okay? Sweet!
                I've heard of "clocking" C&L's to get the vehicle running better but I ran one for years and it got mounted in various positions with no issues. I've also installed a few naturally aspirated power pipes with a lot of different MAFs and didn't have any problems.
                '93 Cobra-Coyote Powered
                '13 Dodge Cummins
                '14 Rubicon X

                Comment


                • #9
                  Originally posted by white88 View Post
                  I've heard of "clocking" C&L's to get the vehicle running better but I ran one for years and it got mounted in various positions with no issues. I've also installed a few naturally aspirated power pipes with a lot of different MAFs and didn't have any problems.
                  What air filter did you run on the power pipe? I have a power pipe and noticed my air filter hits the back of the headlight. It's the larger spectre one.

                  320rwhp. 7.67 @ 90mph 1.7 60'

                  DD: 2004 GMC Sierra VHO 6.0 LQ9 324whp 350wtrq

                  Comment


                  • #10
                    Originally posted by 91CoupeMike View Post
                    What air filter did you run on the power pipe? I have a power pipe and noticed my air filter hits the back of the headlight. It's the larger spectre one.
                    I use this:

                    Comment


                    • #11
                      Originally posted by 91CoupeMike View Post
                      What air filter did you run on the power pipe? I have a power pipe and noticed my air filter hits the back of the headlight. It's the larger spectre one.
                      I used a filter like Robert posted but can't remember where I got it from.
                      '93 Cobra-Coyote Powered
                      '13 Dodge Cummins
                      '14 Rubicon X

                      Comment


                      • #12
                        That is very similar to the smaller spectre one. It has the "air enhancer" cone on the front too. Lol

                        320rwhp. 7.67 @ 90mph 1.7 60'

                        DD: 2004 GMC Sierra VHO 6.0 LQ9 324whp 350wtrq

                        Comment


                        • #13
                          newer o2s will have 4 wires. also, extenders will serve if you had to
                          Ring and pinion specialist

                          Comment

                          Working...
                          X