For the haters and second guessers, bench racers and more.

[91CoupeMike]

What cam did you put in it?

Anderson b25.

Small cam for the heads and intake but should run pretty good.

510/511 218/228 112

[Super Coupe]

That car should run pretty good with that setup and spray of you can keep it together.

[SonicblueGT03]

Video when it's done, maybe it'll get me motivated on my coupe. Been spending all my money on the '12 here lately, 'bout time to show the coupe some love too.

[Super Coupe]

But it real get a dry kit. It will work so much better.

[91CoupeMike]

And for you all wondering why it's taking so long, I took it apart then had to work 9pm to 6am two nights in a row, followed by a day off which I finished tearing it down and cleaned EVERYTHING. Then back to working mornings and the first few days I was tired as fuck and didnt want to work groggy.

Now I'm putting it back together, taking my time and double checking everything. First time doing this alone.

[BlueCoupeRedVert]

Its looking really good Mike, and clean!

[91CoupeMike]

That car should run pretty good with that setup and spray of you can keep it together.

Yeah that's what hope. It should hold for a while. It'll be n/a for a good bit, no sense in spraying it before I get a chance to enjoy it.

[G..]

Anderson b25.

Small cam for the heads and intake but should run pretty good.

510/511 218/228 112

You're leaving alot of power on the table with the brodix heads. And like S C said it would be alot faster and simpler with a dry kit

Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

[Super Coupe]

Video when it's done, maybe it'll get me motivated on my coupe. Been spending all my money on the '12 here lately, 'bout time to show the coupe some love too.

Bust his azz with my old coupe!! Haha

[91CoupeMike]

And lol @ stock valve covers..... Drivers side won't clear due to the oil fill baffle..

Can I unbolt the baffle and it clear or should I just nut up and by the badass brodix ones? ($200)

[91CoupeMike]

You're leaving alot of power on the table with the brodix heads. And like S C said it would be alot faster and simpler with a dry kit

Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

I really havent seen many people run the 1.94 valve ones. I was only able to find one where a guy has a b303 gt40 intake and these heads and it made 297rwhp.

Flow rates are close to afr 165s.

They dont really shine until They are ported. They then out flow the competition afr

[VaderTT]

I guessed 3 times.

[91CoupeMike]

I guessed 3 times.

What?

[Z06killinsbf]

Try unbolting the baffle but may need to grind down the tabs

[91CoupeMike]

Try unbolting the baffle but may need to grind down the tabs

I hope so, but my doubts are high.