i have just Hell with this thing. After first gear install i had horrible vibes. So i was told i needed a new shaft, so i bought a shaft master 1 piece. Still not fixed. Long story short i picked the car up from the ford dealer with a new housing and all new parts inside as well. And yes i put new gears in to. Well vibes are still there. Holly Hell someone help me. Vibes are around 60+ mph. Really bad at 80+.
Announcement
Collapse
No announcement yet.
2012 gt vibrations!!!
Collapse
X
-
From the front or rear? Are you feeling it in the steering wheel or your ass?
Get it up on jackstands and get it up to speed. I'm going to guess one of these: bent wheel, tire out of round, bent axle, pinion angle, wheel not hubcentric.When the government pays, the government controls.
Comment
-
Not the wheels..have two sets. Not an axle...those are new along with housing, dif, gears etc. I am using sphon adjustable upper and lowers. I have not looked at the angle and ford did not look either. Any body know what it needs to be? I am running K springs if it makes a difference. Vibes are under my ass for the most part.
Comment
-
I would guess pinion angle in you changed out the uppers and lowers.
Not sure what the angles are supposed to be, but on my car, I am running a Griggs Racing Watts link and torque arm and when adjusting pinion angle, if I don't get the angles within about 0.5 degrees of each other, I will pick up a little vibration.
Best thing to do is get an angle finder, or you can buy a digital level with an angle finder. find some flat spots on the diff and tranny and see what you are at. Adjust accordingly.
Comment
-
Did you remember to put dowel pins in your flywheel? J/K
Out of Balance Driveshaft? U-Joints?"Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes...Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than to prevent homicides, for an unarmed man may be attacked with greater confidence than an armed man." - Thomas Jefferson, 1776
Comment
-
Originally posted by strokn88lx View PostThe problems started before it was lowered or the control arms. Shits got to go.
Comment
Comment