Announcement

Collapse
No announcement yet.

civic tranny????

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • civic tranny????

    1999 Honda Civic 4cy DX

    CEL came on and it gave me a P0740 code which per shop manual is "Lock up control system".

    I changed fluid with Honda brand and replaced the control solenoid. I don't have tools to measure the line pressure per manual. That's only thing I couldn't do.
    Well, I went for a drive and all 4 gears shift smoothly, but light came back on.
    Anyone know of a reputable transmission shop around Mckinney(willing to drive further away) to check line pressure and/or see what it would cost for a rebuilt one? Or any other ideas?

    thanks

  • #2
    try this

    hold down the odometer 20 sec, turn the key and start the engine, let go and it's gone until the next interval.
    Don't worry about what you can't change.
    Do the best you can with what you have.
    Be honest, even if it hurts.

    "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy; Its inherent virtue is the equal sharing of misery" ... Winston Churchill

    Comment


    • #3
      Damn, I thought this was about a civic tranny.

      Comment


      • #4
        it is

        Originally posted by Craizie View Post
        Damn, I thought this was about a civic tranny.
        it resets that check light
        Don't worry about what you can't change.
        Do the best you can with what you have.
        Be honest, even if it hurts.

        "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy; Its inherent virtue is the equal sharing of misery" ... Winston Churchill

        Comment


        • #5
          Originally posted by jyro View Post
          it resets that check light
          should have read "civic transsexual"

          Comment


          • #6
            Lol

            bump..

            Comment

            Working...
            X