spirolox install tips

[whitepony84]

Any tips/shortcuts to install wrist pin spiral locks? First one took me 20 minutes.

[Alvarado GT]

When I did mine a few years ago, I streched them out a little and used a tiny flat head screwdriver to get them in

[Mark04]

And if you bend one, trash it. It will never go in correctly if it gets bent.

[slow55]

That's one of those things that's easier to show than explain how to do.

I just stretch them out slightly, insert on end and just walk them around untill the whole thing is in. I used to be able to do them in no time and never needed any tools to do it with.

[garycrist]

Hold your mouth just right too. Patients and a little carb screwdriver and roll them in.

[turbostang]

That's one of those things that's easier to show than explain how to do.

I just stretch them out slightly, insert on end and just walk them around untill the whole thing is in. I used to be able to do them in no time and never needed any tools to do it with.

This.

Also, as mentioned above, if you bend them (radially), they are trash.