anyway to fix my h-pipe?

[Jake98SVT]

i need help, yesterday i was coming out of my girlfriends apartment complex and something tore my hpipe up pretty good. i was wondering if there is anyway to get the flange back on the hpipe? or would i be better off just finding another mid pipe?

pics

[Dacotua]

buy a new one. That will never seal right again.

[TENGRAM]

cool pipe, hot flange, thick oil, and a BFH. Maybe also some short piece of tube the same diameter as the flange, that way you can put it up against the flange and beat on it.

[TENGRAM]

and, yes, it'll probably slip back off whenever it is least convenient for you.

[The King]

anyway to fix my h-pipe

i need help, yesterday i was coming out of my girlfriends apartment complex and something tore my xpipe up pretty good. i was wondering if there is anyway to get the flange back on the xpipe? or would i be better off just finding another mid pipe?

.....

[RuStYpNuS]

.....

^ this lol.......its an h pipe not an x pipe......

[Jake98SVT]

FML i was looking on forums for another one and was thinking of going with a xpipe to replace it, which is why i wrote that.. lol

[RuStYpNuS]

try standing it on its end and lay the flange IN THE RIGHT DIRECTION on the end of the h pipe. I would lay a block of wood under the h pipe ends and one on top of the flange.....beat the shit out of it with a BFH and itll go back on.......

[greenbullitt]

any muffler shop can hook that up, or just put different flanges on it!

[351Coupe]

Honestly I wouldn't even fuck with it. Just buy a new one. You can find them cheap enough. And as previously stated, more than likely it will never seal right or come back off. It's not worth the effort.

[Boondock Saint]

Is your car lowered? hit a speed bump? In addition to fixing/replacing it I would find out what ripped the flange of. No sense fixing it only to have ripped right back off.

[LS1Goat]

any muffler shop can hook that up, or just put different flanges on it!

x2

[Jake98SVT]

Is your car lowered? hit a speed bump? In addition to fixing/replacing it I would find out what ripped the flange of. No sense fixing it only to have ripped right back off.

yea i know what it hit, it was something connected to the bottom of the gate we went through. i am thinking it was a motion sensor for it.

[Jaison]

yea i know what it hit, it was something connected to the bottom of the gate we went through. i am thinking it was a motion sensor for it.

what complex is it so i know to avoid it?

[shumpertdavid]

I've got a generic x-pipe if your interested pm me. It's not pretty, but functional.