Rearend swap guide?

[Tannerm]

Anyone have a good detailed stirrup or vid of a 8.8 removal and install? Gunna tackle my 7.5 to 8.8 swap. Thx!

[Sleeper]

Rip the old one out and put new one in and attach brake lines. Cant be that hard, but i need to tackle this myself in my zephyr, but im going to make all new custom brake lines.

[SonicblueGT03]

IIRC, the brake fitting that splits the lines on the rear is different, or has a different style mount. Other than that, the control arms bolt right up to the same spots, the drive shaft should bolt right up. If it's nice enough, and depending on the gears, I might raise my offer by $200.

[Tannerm]

Done! Easy easy... It made a big difference.