Announcement

Collapse
No announcement yet.

7.3 Diesel issues...

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    7.3 Diesel issues...

    Anyone near Frisco that can work on my 2000 Excursion 7.3? I have replaced the UVC (under valve cover) wiring harness on the driver side and it ran great afterwards (did this yesterday evening) I was able to determine it was the driver side by taking the temp on each manifold (driver side was much cooler than the pass side while running) but it is now running rough again. Need someone with access to the necessary Ford diag tools to locate issue and fix, maybe someone is wanting/needing some side work?

    Duncan
    Tags: None
  • #2
    You need someone with the diag tools that can run the buzz test and such

    Sent from my cellular portable phone device
    1988GT DSS pro bullet 306,pp track heat heads, pp downs box intake, TFS stage II cam, S-trim 13lbs, 503/461
    2002 VTX 1800C Chopped and Raked
    2000 F250 4x4 PSD
    2012 Ford Exploder
    www.fquick.com/payne5757
    www.myspace.com/payne5757

    Comment

    • #3
      Originally posted by payne5757 View Post
      You need someone with the diag tools that can run the buzz test and such

      Sent from my cellular portable phone device
      He said that in the last sentence of his post.
      2010 F-350 6.4L SRW CC 4X4

      Spartan tunes, 5 inch flo-pro, 4 inch down pipe, cold side piping, AFE stage 2 CAI, EGR delete, Air Dog II

      2012 Mustang 5.0 GT Stock........for now.

      Comment

      • #4
        I have a friend who is a Diesel Tech at Bankston in Frisco that can look at it for you.

        PM me and I'll send over his number if you are interested

        Comment

        • #5
          Originally posted by Prime-Tuning.com View Post
          I have a friend who is a Diesel Tech at Bankston in Frisco that can look at it for you.

          PM me and I'll send over his number if you are interested
          PM sent.

          Comment

          • #6
            Though I've replaced a number of the harnesses under the valve covers on theses I'm betting it's the conection on the valve cover gasket itself. I've replaced a shit ton of them.

            Comment

            • #7
              Originally posted by Mysticcobrakilla View Post
              Though I've replaced a number of the harnesses under the valve covers on theses I'm betting it's the conection on the valve cover gasket itself. I've replaced a shit ton of them.
              This is where I will start when I get off this evening. This morning I was grabbing wires and noticed the wires going into the glow plug module for the driver side (there are two connections, one is black and the other is green) were warm to the touch, so I would assume this means there is a short somewhere. I also replaced that glow plug module a few months ago.

              Is there also a kit for the top part of UVC wiring harness? That appears to be a lot larger (longer wire harness) hopefully it doesnt cost as much as I think it does....going to google it now, thanks.

              Comment

              • #8
                Originally posted by Duncan View Post
                This is where I will start when I get off this evening. This morning I was grabbing wires and noticed the wires going into the glow plug module for the driver side (there are two connections, one is black and the other is green) were warm to the touch, so I would assume this means there is a short somewhere. I also replaced that glow plug module a few months ago.

                Is there also a kit for the top part of UVC wiring harness? That appears to be a lot larger (longer wire harness) hopefully it doesnt cost as much as I think it does....going to google it now, thanks.
                its offered as a pigtail through various suppliers instead of having to do the whole harness
                Ring and pinion specialist

                Comment

                • #9
                  Originally posted by greenbullitt View Post
                  its offered as a pigtail through various suppliers instead of having to do the whole harness
                  Ah, thanks. I will look around for one. I am sure Ford has one....hopefully

                  Comment

                  Previous template Next
                  Working...
                  X