need help new motor wont start

[eric 2v gt]

yeah ima go ahead and get the tfs heads while its out

[shumpertdavid]

Intake gaskets will be unlikely with port layout and a closed engine valley, cracked cylinder wall, cracked head or gaskets damage most likely unfortunately.

[eric 2v gt]

if it was intake gaskets coolant would be in the exhaust, hopefully cracked head , praying the block is good

[SC457A]

I am guessing you did not try to do a cooling system pressure test?

Hope its something simple and cheap. I had head studs seep coolant into the oil on my SBC, but thats a lot different.

[eric 2v gt]

nope , it had coolant in the oil before the coolant was even warm , wasnt even presszuired , not sure what to check first , motor is already out

[bobs94formula]

Don't know much about 4.6's,but is there a possibility the head gaskets were put on wrong? Maybe heads weren't torqued down properly?

[Sleeper]

Those things have way to many bolts and shit for me. Plus i bet the timing chain is just as long as the chain on my baler.