Fuel System Components

[payne5757]

Right now I have an Aeromotive sumped fuel tank and a Holley Boost reference FPR sittin in my garage. I need to acquire a pump(A1000 or similar), a filter, fuel rails, -8 or -10 feed, -6 return line, 60lb injectors, 90+mm MAF, 80+mm TB, and all of the necessary fittings as well as anything I'm forgetting. Anyone have recommendations for what I should get and the best place to order from or does anyone possibly have any of this that they are looking to sell??

Sent from my cellular portable phone device

[BlueCoupeRedVert]

I got some nice an fittings and steel braided line on ebay from seller getfast1. Good stuff and good prices. Don't get anything from ProFuel Delivery. That's ProComps fuel stuff. I tried the an fittingLhose ends and they suck. Switched to RedHorse hose ends. They are very nice.

[payne5757]

Thanks

Sent from my cellular portable phone device

[VaderTT]

Racepartsolutions.com has great deals in -an fittings and line. I know theturbofurums has a discount with them also. Call in an order and say you're a member of that site.

[projectPONY]

I have a set of practically new Aeromotive rails, with fittings, that I might let go. Shoot me an offer if interested.


sent from an htc EVO, the iCrap killer.

[payne5757]

What all lines and fittings are there?

Sent from my cellular portable phone device

[john98gt]

Call fast turbo in haslet. Ask for Stan

[payne5757]

Call fast turbo in haslet. Ask for Stan

Ok thanks

Sent from my cellular portable phone device

[robert]

I just did mine
-8an Aeromotive rail fittings (4)
-10an Tank to pump 2 -10 90* fittings
-8an Pump to engine directly to rail (2) 90*/120*
-6an Return from regulator to tank (2) 90*/90*
You can find holding clamps at HD or Lowes in the electric section.
I'm not using a Y block for distribution instead feed directly to the rail
passenger side-rail is looped in the back and capped on the driver side
with the return exiting the driver side in the middle of that rail.
Just an idea, each set up is unique. G/L
And yes Stan is very helpfull and carries in stock many fittings
if not also try Smiley's

[payne5757]

I just did mine
-8an Aeromotive rail fittings (4)
-10an Tank to pump 2 -10 90* fittings
-8an Pump to engine directly to rail (2) 90*/120*
-6an Return from regulator to tank (2) 90*/90*
You can find holding clamps at HD or Lowes in the electric section.
I'm not using a Y block for distribution instead feed directly to the rail
passenger side-rail is looped in the back and capped on the driver side
with the return exiting the driver side in the middle of that rail.
Just an idea, each set up is unique. G/L
And yes Stan is very helpfull and carries in stock many fittings
if not also try Smiley's

Thanks, this REALLY helps!! Where is your filter tho??

Sent from my cellular portable phone device

[robert]

Thanks, this REALLY helps!! Where is your filter tho??

Sent from my cellular portable phone device

Both filters with pump are bolted to the tank shield

[payne5757]

Thanks again.

Sent from my cellular portable phone device

[robert]

NP I know the feeling of trying to get as much info as possible b4
getting hands and pockets dirty.
Some cool folks in here that always try to stay anonymous for there own reasons
did help me along the way as well. G/L

[payne5757]

Thanks to projectPONY, I will soon have a set of rails. Basically I just need a pump, filter, and the assorted lines and fittings. Anyone have any of this?

Sent from my cellular portable phone device