Brake gurus inside

[junior]

91 fox

car has no fluid to rear brakes.
i bled the master and tried pressure bleeding the rear brakes, right rear first then left cant get any solid fluid to come out, all i get is a lot of air and fluid mixed.

the car has stock master cylinder with summit adapter plate to make them "manual".

any ideas??

front brakes work just fine.

[91CoupeMike]

Sounds like a bad master cylinder not pushing fluid. Try cracking the rear brake line off the master and see if it bleeds or just blows air.

[junior]

it moves fluid, fronts work and bleed fine.

[Baron Von Crowder]

Is it moving the rear fluid? Test it first.

[junior]

yes it moves fluid, very little and mostly to the right rear.

i have taken a blow gun and blew it at stock proportioning valve and fuid came out of both sides at rear.

[Baron Von Crowder]

Sounds like you kinda answered your own question.

[junior]

Sounds like you kinda answered your own question.

i guess im really lost in the kinda?

what are you thinking?

[Baron Von Crowder]

If you aren't pushing enough fluid to the rear to get to both sides, and the line (there's only one to the rears)is clear, then is the master.

[DON SVO]

Master cylinder works with two plungers. Typically, the front gets fed first. When the master fails, the rears typically show the failure since the rear has only one plunger. It's a safety mechanism to help make sure you have brakes since the fronts do most of the work. Your master cylinder failed, hence the weak rears.

[junior]

Its time to test another Master.

[Grape]

the pushrod that goes through the firewall isn't adjusted correctly and won't come back far enough to open the transfer hole in the m/c.

[junior]

the pushrod that goes through the firewall isn't adjusted correctly and won't come back far enough to open the transfer hole in the m/c.

Will check that before I do anything!

[4king]

Check the rear brake lines. It's possible that after 20 years one has rotted out

[junior]

the pushrod that goes through the firewall isn't adjusted correctly and won't come back far enough to open the transfer hole in the m/c.

ding ding ding!
weiner weiner chicken dinner!

ill have to hook you up with some hookers and blow at the track

[jyro]

lol

ding ding ding!
weiner weiner chicken dinner!

ill have to hook you up with some hookers and blow at the track

old men don't do that