Tweet
15x10 6.5 bs w/ Cobra rear brakes solid axle
I have looked and looked all over and can't seem to find a difinitive answer and I know that people are running this set up on their cobra. My car is a 94 Cobra and I am trying to f it a 15x9.25 with a 6.5 backspacing.
The barel of the wheel hits the banjo bolt area. I have found people referencing low profile banjo bolts, but can not seem to track any down. Others have completely ground the head off the bolt.
If you actually know of a place that has "low Profile" banjo bolts, please let me know where they can be had and a part number if possible.
I do NOT want to swap to GT brakes. I know that a 5.5 bs will work, but I have the 6.5 wheel and that's whats going on. Any help would be greatly appreciated.
thanks,
Jeff
The barel of the wheel hits the banjo bolt area. I have found people referencing low profile banjo bolts, but can not seem to track any down. Others have completely ground the head off the bolt.
If you actually know of a place that has "low Profile" banjo bolts, please let me know where they can be had and a part number if possible.
I do NOT want to swap to GT brakes. I know that a 5.5 bs will work, but I have the 6.5 wheel and that's whats going on. Any help would be greatly appreciated.
thanks,
Jeff
Comment