84 C10 - Headliner Replacement

[BEARY]

Looking for a place that can replace the headliner in truck.

Anyone?

[Woods Racing Transmission]

Looking for a place that can replace the headliner in truck.

Anyone?

What part of town are you in?

[onjacks]

I can do it. Where you located

[thedriver33]

if you want good work....hit up prestons over in irving....does amazing work.

[BEARY]

I live in North Richland Hills/Keller area..(Ft. Worth side of town)..Like to get it done ASAP.
If you are interested in doing it (onjacks) shoot me a PM.
If you have a place to recommend, please shoot me the contact informaiton by PM.

Thanks again for the help guys!

[onjacks]

Look up Larry Dennis company off 121. That's where you can pick out the type/color of headliner you want. They sell it by the yard. You need 2 yards if it's standard cab.

[BEARY]

Look up Larry Dennis company off 121. That's where you can pick out the type/color of headliner you want. They sell it by the yard. You need 2 yards if it's standard cab.

Okay, will do.

Once I get the fabric/material, what else am I going to need? When could you do it and what am I looking at for your service?

[onjacks]

Really depends if your gonna pull the headliner out yourself. The hardest part of redoing the headliner is removing it.

[1fast4]

I did mine in my 76 SWB myself.
I used a black felt material. In the process of changing the interior color from Red to Black.
Used the 3M Super 90. It is VERY quick on the tack so you have to be careful when you apply the new material.
Biggest pain was getting a clean surface After taking off the old factory material.
4 hands makes removal and reinstall MUCH easier. If you don't have a helper, use a pole or prop from the seat to the headliner to hold it while you remove/reinstall all the trim pieces.

Good luck, hope it turns out good for you.

[onjacks]

it really is very easy for a diy project. best way ive found for removal of old liner is a wire wheel on as grinder.

[BEARY]

I guess I'll shoot down there, get the material and some spray adhesive and give it a shot myself then. I just really don't have the time to mess with it, has nothing to do with ability.

Thanks for the feedback guys!