Anyone have a cam degree kit?

[91CoupeMike]

Anyone on here have a cam degree kit they don't mind lending out? I'll put down a deposit, I just need to use it to check the cam with the cam card to make sure it's dialed it. Dont want to spend $100 on one right now.

450$ for gaskets and hardware.

[Kart21]

Got a degree wheel and several dial indicators. Kit ????

[91CoupeMike]

Got a degree wheel and several dial indicators. Kit ????

Soft valve springs and there is a kit that has a tdc bdc marker pre made, my old boss has everything but a wheel he will let me use.

So I need a wheel, and maybe some softer springs I'll have to see what all he has.

[R3_82GT]

http://dallas.craigslist.org/ftw/pts/3028160951.html

[91CoupeMike]

Nice find sir. Thank you.

[Grape]

Um, most people measure on top of the lifter, no valve springs or cylinder heads installed.

[dumpycapri85]

Um, most people measure on top of the lifter, no valve springs or cylinder heads installed.

The soft springs are good for checking PTV along with solid lifters . I have the full TFS kit that Summit sells and 2 roller lifters I converted as well as the piston stop .

Mike ,
If you want to pick it up and drop it off you can use it but I am in NRH .

[Grape]

i think i wanna come watch this for entertainment purposes.

[91CoupeMike]

i think i wanna come watch this for entertainment purposes.

Here you go hot rod.

Replace my lifter with a solid roller and it's all the same.

[91CoupeMike]

The soft springs are good for checking PTV along with solid lifters . I have the full TFS kit that Summit sells and 2 roller lifters I converted as well as the piston stop .

Mike ,
If you want to pick it up and drop it off you can use it but I am in NRH .

If this guy on CL flakes out I will take you up on your offer sir! Thanks!

[dumpycapri85]

If this guy on CL flakes out I will take you up on your offer sir! Thanks!

You got it .

[Kart21]

If all goes to shit, I got the wheel. springs old school solid lifter mag base indicator ect, if ya need em.